1–36 von 36 Ergebnissen
|

    100 kHz-inverter for contactless energy transmission in automotive applications

    Mecke, Rudolf / Fischer, Dirk / Rathge, Christian et al. | Tema Archiv | 2003
    A new application field for contactless inductive energy transmission is the power supply of auxiliary circuits in automobiles. This ...

    Comparative study of topologies for Bi-directional, DC/DC converters in automotive applications

    Ide, Peter / Wallmeier, Peter / Kunze, Jürgen et al. | Tema Archiv | 2003
    After giving a brief overview on the architecture in future vehicles board power systems, the basic requirements for the main converter are ...

    EMI in electric vehicles

    Guttowski, S. / Weber, S. / Hoene, E. et al. | Tema Archiv | 2003
    drive system is a new component consisting of a high-voltage power source, a frequency converter, an electric motor and shielded or unshielded ...

    A new power module concept for automotive applications

    Beckedahl, P. / Grasshoff, T. / Lederer, M. | Tema Archiv | 2007
    Automotive and high end industrial applications require a new approach for power modules to fulfill the requirements in terms of power ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Power-Modul , Kfz-Elektronik

    Cascaded boost-buck DC/DC-converter for dual-voltage automotive power-nets with overlapping voltage ranges

    Polenov, D. / Reiter, T. / Pröbstle, H. et al. | Tema Archiv | 2007
    introduced. The voltage and current stress for the components of the power stage was investigated. A high-side driver supply circuit for static and ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Variable DC-link voltage source inverter for reactive power compensation in single phase 25 kV AC railway systems

    Haederli, Christoph / Ladoux, Philippe / Meynard, Thierry | Tema Archiv | 2007
    A new concept for reactive power compensation in single phase AC railway systems (in particular 25 kV high speed railway systems) is ...
    Verlag: Mesago PCIM , Stuttgart

    Optimised induction motor drive for automotive applications

    Graovac, Dusan / Kiep, Andreas / Pürschel, Marco | Tema Archiv | 2007
    The aim of this paper is to present an optimisation method for designing a power electronics inverter for an induction motor drive in ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    A phase-shifted dual half-bridge ZVS bidirectional DC-DC converter for supercapacitor interface

    Mishima, Tomokazu / Hiraki, Eiji / Nakaoka, Mutsuo | Tema Archiv | 2007
    A novel phase-shifted Zero Voltage Switching bidirectional DC-DC converter for supercapacitor interface is presented in this paper. The ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Design of a line voltage booster in a new supply system for 1.5 kV catenaries

    Postiglione, G. / Ladoux, P. | Tema Archiv | 2007
    , without new substation, the authors propose in this paper a new topology based an a feeder transmitting the power with a voltage twice of 1.5 kV ...
    Verlag: Mesago PCIM , Stuttgart

    Automotive switching DC to DC regulator concepts with high efficiency sleep mode

    Dostal, Frederik | Tema Archiv | 2007
    for purposes of protecting a vehicle. Very little power is needed in such 'sleep' states. Currents are typically in the micro amps range ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Soft-switching converter using current controlled non-linear inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2007
    A novel soft-switched multi-phase converter for the 42 V/14 V automotive electrical power system has been built and tested. Switching ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Prediction and measurement of common mode EMI influence on high side current measurements

    Spang, M. / Fischer, T. / Schubert, G. et al. | Tema Archiv | 2007
    of the needed input filter decreases with the component mismatch. The decreasing common mode attenuation is a problem for a lot of ...
    Verlag: Mesago PCIM , Stuttgart

    Power electronic converter for hybrid-drive systems

    Renken, Folker | Tema Archiv | 2008
    power train and board-net structures for hybrid drive systems are presented. In this context the system efficiency of a typical mild-hybrid ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Investigation of load profiles for power electronic converters in cars with fuel-cell based auxiliary power units

    Teichert, Christian / Lindemann, Andreas | Tema Archiv | 2008
    for modelling of the components of the vehicle electrical system. From the energy balance, current ratings of the power electronic converters ...
    Verlag: Mesago PCIM , Stuttgart

    Three phase power factor correction front-end for variable frequency networks

    Groke, Holger / Christ, Timo / Orlik, Bernd et al. | Tema Archiv | 2008
    is varying between 90 VRMS and 130 VRMS at frequencies between 360 Hz and 800 Hz. In order to realize a power factor corrected front end for ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Power loss consideration of SMPS transformers for hybrid vehicles

    Faust, Christian / Kutschker, Martin / Herzog, Hans-Georg | Tema Archiv | 2008
    The increasing environmental awareness and the shortage of fossil fuels are pushing the development of hybrid vehicles. For the bi ...
    Verlag: Mesago PCIM , Stuttgart

    Analysis and control of multiphase DC/DC-converters for dual-voltage automotive power-nets

    Reiter, Tomas / Polenov, Dieter / Pröbstle, Hartmut et al. | Tema Archiv | 2008
    A task-shared current control structure for multiphase DC/DC-converters was developed and implemented in a prototype system. The behaviour ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    From vehicle drive cycle to reliability testing of power modules for hybrid vehicle inverter

    Thoben, M. / Mainka, K. / Bayerer, R. et al. | Tema Archiv | 2008
    power semiconductors, usually packaged in a module, are used. To qualify such power modules for the use in HEV amongst others power cycling and ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Two-phase boost converter for 14 V/42 V automotive applications using coupled tapped inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2008
    optimum of 50 %. The proposed converter can therefore be an attractive solution for the 14 V / 42 V automotive power net in particular for ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Resonant motor drive topology with standard modules for electric vehicles

    Frisch, Michael | Tema Archiv | 2008
    The paper presents the development of an electrical motor drive for a commercial application. Different technical solutions for the ...
    Verlag: Mesago PCIM , Stuttgart

    Efficiency and lifetime optimising energy management for mobile and portable fuel cell battery hybrid systems

    Bocklisch, Thilo / Trompke, Wolf-Jürgen / Bocklisch, Steffen | Tema Archiv | 2008
    This paper discusses the advantages of fuel cell battery hybrid systems and describes the experimental test-bed for hybrid power supplies ...
    Verlag: Mesago PCIM , Stuttgart

    Small permanent magnet synchronous motor technology - An overview

    Iles, D. | Tema Archiv | 2008
    Verlag: Mesago PCIM , Stuttgart

    Semiconductors in hybrid drives applications - A survey lecture

    Graf, Ingo / Münzer, Mark Nils | Tema Archiv | 2008
    Hybrid electrical vehicles (HEV) have the potential to save energy in the automobile. Beside the power semiconductor devices used for the ...
    Verlag: Mesago PCIM , Stuttgart

    Low temperature joining technique - A solution for automotive power electronics

    Schulze, Elisabeth / Mertens, Christian / Lindemann, Andreas | Tema Archiv | 2009
    a new concept for power electronic modules is presented in this paper. At first the state of the technology of the Low Temperature Joining ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Performance computations of direct drive high power permanent magnet synchronous machines with different rotor and stator structures for locomotive traction application

    Mirzaei, Mehran / Binder, Andreas / Qu, Yanqing | Tema Archiv | 2009
    An analysis of 1 MW permanent magnet (PM) synchronous machines for a 4 MW locomotive application is presented. The motors are of direct ...
    Verlag: Mesago PCIM , Stuttgart

    Control-oriented, optimizing energy management concept for fuel cell hybrid systems

    Bocklisch, Thilo / Paulitschke, Martin / Bocklisch, Steffen et al. | Tema Archiv | 2009
    A new energy management concept for fuel cell hybrid systems is introduced. The optimization of power flows is achieved by a control ...
    Verlag: Mesago PCIM , Stuttgart

    Filter design optimization of an automotive multi-phase converter using coupled inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2009
    The stringent automotive EMI specifications may result in bulky and expensive filter components. Therefore a cost model for the filter ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    LED-driver with integrated dimming feature and its influence on chromaticity values

    Thomas, Werner / Pforr, Johannes | Tema Archiv | 2009
    determine their influence on LED color-stability. A boost converter with integrated LED dimming feature has been built for an automotive daytime ...
    Verlag: Mesago PCIM , Stuttgart

    Application of a flyback converter to control an automotive spring-damper system with a piezoelectric actuator

    Teichert, Christian / Fischer, Wolfgang / Lindemann, Andreas | Tema Archiv | 2009
    measurements confirm the function of the circuit and the control algorithm. Further work will focus on practical investigations for different ...
    Verlag: Mesago PCIM , Stuttgart

    Facing high thermal loads on power modules in Hybrid Electrical Vehicles

    Christmann, Andre / Mainka, Krzysztof | Tema Archiv | 2010
    In automotive industry the IEC standard Q100/101 is used as a guideline for stress testing and reliability requirements. The launch of ...

    Capacitive DC-DC converter for electric vehicle applications

    Pelczar, Christopher / Zirn, Oliver | Tema Archiv | 2010
    simulative design options as well as the achievable power and efficiency. ...

    Admittance representation of an advanced multivariable control for 16.7-Hz railway traction line-side converter

    Heising, Carsten / Oettmeier, Martin / Bartelt, Roman et al. | Tema Archiv | 2010
    Grid stability is a major concern for the control of a traction vehicle line-side converter. To achieve best dynamic performance, the ...

    New module concepts exclusively built with low temperature joining technique for single- and double-sided cooling

    Schulze, Elisabeth / Mertens, Christian / Lindemann, Andreas | Tema Archiv | 2010
    Joining Technique are analyzed with respect to adaptability for automotive power modules. A new idea for building double side cooled power ...
    Schlagwörter: Leistungselektronik

    Energy storage on board of railway vehicle

    Fröhlich, Michael / Klohr, M. / Rost, J. | Tema Archiv | 2010
    The paper describes the new energy storage equipment for LRV's (Light Rail Vehicles), the MITRAC Energy Saver ES500 in combination with the ...

    Compact PCB-packaging and water cooling of a 25-kW inverter

    Munding, A. / Thoben, M. / Hong, T. et al. | Tema Archiv | 2010
    Typical power electronic applications in transportation are inverters, which require a compact, weight optimized and robust packaging in ...

    New transfer-mold power module series for automotive power-train inverters

    Ishihara, M. / Hiyama, K. / Yamada, K. et al. | Tema Archiv | 2012
    This paper presents a new Transfer-mold Power Module (T-PM) series (called J-Series TPM) dedicated for automotive Power-Train inverter and ...