Synonyme wurden verwendet für: Standard
Suche ohne Synonyme: keywords:("Standard")

1–50 von 236 Ergebnissen
|

    Kurzzeichen für Kunststoffe

    Eine kritische Betrachtung
    Land, Wolfgang | IuD Bahn | 1999
    Schlagwörter: Norm , EN = Europäische Norm , DIN-Norm

    New method uses hardness to find yield strength

    Radmard, Shadie / Berg, Monique | Tema Archiv | 2011
    Schlagwörter: ASME-Norm , Norm , ASME-Standard

    Innovative HexFlame-Kautschukmischungen erfüllen die neue Norm EN45545-2 für Brandschutz in Schienenfahrzeugen

    Herbiet, R. / Walter, R. | Tema Archiv | 2015
    Schlagwörter: Europäische Norm , nationale Norm

    Material problems for railway tyres

    Cupita, F. / Sevcik, A. | Tema Archiv | 1989
    Schlagwörter: GOST NORM , ISO-NORM

    Influence of preheating on API 5L-X80 pipeline joint welding with self-shielded flux-cored wire

    Cooper, R. / Silva, J.H.F. / Trevisan, R.E. | Tema Archiv | 2005
    Schlagwörter: AWS-Norm , ASTM-Norm

    ADI promotional conference success

    Tema Archiv | 2002
    Schlagwörter: ASTM-Norm , SAE-Norm , ISO-Norm , DIN-Norm

    Prüfungen der Schutzbeschichtungen der Radsatzwellen

    Novosad, Miroslav / Fajko, Rostislav | IuD Bahn | 2006
    Schlagwörter: Norm

    Keine Chance für Feuer und Flamme

    Fachtagung
    Greven-Prautsch, Jeanette | IuD Bahn | 2007
    Schlagwörter: Norm

    Experimental and analytical investigation of thermal coating effectiveness for 3 m3 LPG tanks engulfed by fire

    Landucci, Gabriele / Molag, Menso / Reinders, Johan et al. | Tema Archiv | 2009
    Schlagwörter: Standard

    Ueber die entwicklung und pruefung von hydraulik-leitungssystemen fuer zukuenftige flugzeuge

    Mutzke, R.W. / Nelson, W.G. / Velden, J.H.Vander | Tema Archiv | 1971
    Schlagwörter: NORM

    Requirements on the metal in gas pipeline

    Arabey, A.B. | Tema Archiv | 2010
    Schlagwörter: internationale Norm

    Akkreditierung nach EN 45 001

    Erfahrungen aus Prüflaboratorien
    Frenz, H. / Kühn, H.-D. | IuD Bahn | 1994
    Schlagwörter: DIN-Norm

    Influence of key parameters on NACE standard TM0177 DCB Gas Test

    Moderer, L. / Holzer, C. / Mori, G. et al. | Tema Archiv | 2013
    Schlagwörter: Standard

    Standardized load assumptions for testing trailer coupling devices of passenger cars

    Bruder, T. / Weiland, S. | Tema Archiv | 2009
    Schlagwörter: Norm

    European standards for aerospace surface finishes

    Blackford, R. | Tema Archiv | 2002
    Schlagwörter: CEN (Kommission Europäische Norm) , Europäische Norm , internationale Norm , ISO-Norm

    Beitrag zur Ermüdungsbemessung von Stahlbrücken nach Eurocode

    Kuhlmann, Ulrike / Euler, Mathias / Kudla, Konrad | Tema Archiv | 2011
    Schlagwörter: EU-Norm

    Corrosion of aluminum marine alloys in boats

    Summerson, Thomas J. | Tema Archiv | 2008
    Schlagwörter: ASTM-Norm

    Neues Bahnsteigsystem unter Verwendung von glasfaserverstärktem Kunststoff. Modulares Bahnsteigsystem MBS 2001

    Winter, Karl-Heinz / Kaschwich, Eberhard / Schmidt, Peter et al. | Tema Archiv | 2007
    Schlagwörter: EU-Norm

    Schadgasprüfungen von Kfz-Komponenten am Beispiel Airbag

    Reichert, T. / Braunmiller, U. | Tema Archiv | 1992
    Schlagwörter: DIN-NORM , NORM

    Crude oil cargo tankers - specific challenges in corrosion protection

    Engel, Daniel / Koller, Sven | Tema Archiv | 2007
    Schlagwörter: Standard

    A new method for determining the fracture toughness of main pipeline steels

    Said, Galip / Aytekin, Halil | Tema Archiv | 2013
    Schlagwörter: ASTM-Norm

    Passivation of aerospace stainless steel parts with citric acid solutions

    Gaydos, S.P. | Tema Archiv | 2002
    Schlagwörter: ASTM-Norm , SAE-Norm

    Comments and criticisms the NACE standard RP-01-76 for offshore structures

    Smart, J.N. | Tema Archiv | 1979
    Schlagwörter: AUSLAENDISCHE NORM

    DNV RP F-201; recommended practice for design of titanium risers

    Leinum, Bente H. | Tema Archiv | 2003
    Schlagwörter: Standard

    2007-01-0800 Improving a Vehicle Theft Deterrent System's Communication Using Design for Six Sigma (DFSS)

    Biondo, W. / Griffin, J. / Society of Automotive Engineers | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0534 Establishing a Process for the Validation of an Electronic Control Unit Using Six Sigma Methodology

    Loganathan, Y. D. / Ansari, A. A. / Makkapati, S. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0531 Implementation of a New Lean Innovation Strategy

    Fuhrmann, B. / Garcia, P. / DeSilvio, G. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    Schadgastests an Elektronikbauteilen

    Reichert, T. / Cäsar, J. | Tema Archiv | 1998
    Schlagwörter: DIN-Norm , internationale Norm

    Filler metal procurement made easy

    Newell, W.F. / Swain, R.A. | Tema Archiv | 2001
    Schlagwörter: ASME-Norm , AWS-Norm

    2007-01-0992 Development of a Robust Design Approach for Occupant Protection Performance in Frontal Impact using Design For Six Sigma

    Hsu, J. / Kunihiro, A. / Yasin, A. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    Auslegung von Fremdstromanlagen an Bord von Schiffen. Erläuterungen zur Norm VG 81259

    Richter, B. / Weber, S. | Tema Archiv | 1999
    Schlagwörter: Norm

    2007-01-0536 Development of Advanced Dimensional Control Method for Design for Six Sigma (DFSS)

    Zhang, B. / Society of Automotive Engineers | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0530 Using Six Sigma Concepts in the Engineering Process at Automotive Suppliers: Analysis of an Acoustical Test Bench

    Brand, J.-F. / Berg, S. / Garcia, P. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    Wenig Neues, aber gute Geschäfte

    Flammschutzmittel
    Troitzsch, Jürgen | IuD Bahn | 2008
    Schlagwörter: DIN-Norm

    2007-01-0532 Lean Engineering - Best Practice in the Automotive Industry

    Garcia, P. / Drogosz, J. / Society of Automotive Engineers | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0799 Innovative Six Sigma Design Using the Eigenvector Dimension-Reduction (EDR) Method

    Wells, L. J. / Youn, B. D. / Xi, Z. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0535 Six Sigma Applied for Transactional Area

    Garcia, P. / Baumann, A. / Kolsch, R. et al. | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    2007-01-0533 A Case Study: Improvements in Automotive Motion Simulators Using Six Sigma Methodologies

    Mitchell, R. W. / Schultz, B. / Society of Automotive Engineers | British Library Conference Proceedings | 2007
    Schlagwörter: Six sigma (Quality control standard)

    Induced AC creates problems for pipe lines in utility corridors

    Smart, J.S. III / Oostendorp, D.L. van / Wood, W.A. 'Bud' | Tema Archiv | 1999
    Schlagwörter: ausländische Norm , DIN-Norm

    Revisiting ASME strain-based dent evaluation criterion

    Rafi, Abu Naim Md / Das, Sreekanta / Ghaednia, Hossein et al. | Tema Archiv | 2012
    Schlagwörter: ASME-Norm

    Designing wheelsets to suit the global market

    Janos, Petr / Zima, Radim | Tema Archiv | 2013
    Schlagwörter: amerikanische Norm

    VDA Werkstoffblatt 239: An Approach for a Global Sheet normung

    Dettinger, Thomas / Eberlein, Wolfgang / Gustke, Marko et al. | Tema Archiv | 2011
    Schlagwörter: internationale Norm , SAE-Norm