Outdoor exposure tests in marine atmosphere of 40CrNi2Si2MoVA high strength steel were carried out in Qingdao (on the east coast of Shandong facing the East China Sea) and Wanning (on the east coast of Hainan Island facing the South China Sea) respectively. The test samples include plate sample, samples for tensile and various stress corrosion cracking (SCC) test. The corrosion behavior of the steel was examined by means of mass loss measurement, SEM, as well as the change of mechanical property and SCC susceptibility. The results show that general corrosion occurs on the surface of 40CrNi2Si2MoVA steel, corrosion products are mainly Fe3O4, Fe2O3, γ-FeOOH and α-FeOOH; the mass losses vary at w=atb(b<1). The steel exhibited high SCC sensitivity in marine environment with typical intergranular cracking, and the crack initiated from corrosion pits in the surface and developed inwards. Higher corrosion rate and higher SCC sensitivity were observed in Hainan rather than in Qingdao. The decrease of tensile strength is result from corrosion inducing premature fracture in a short term.
Marine Atmospheric Corrosion of 40CrNi2Si2MoVA High Strength Steel
Titel chinesisch
Fushi Kexue Yu Fanghu Jishu = Corrosion Science and Protection Technology ; 26 , 5 ; 413-419
2014
7 Seiten, Bilder, Tabellen, 15 Quellen
Aufsatz (Zeitschrift)
Unbekannt
Atmospheric Corrosion Mechanisms of Painted Steel
SAE Technical Papers | 1983
|HIGH STRENGTH SPRING STEEL HAVING EXCELLENT CORROSION RESISTANCE
Europäisches Patentamt | 2017
|Corrosion resistance of high-strength modified 13 % Cr steel
Tema Archiv | 1999
|Corrosion data system for marine steel structures
Tema Archiv | 1989
|