1–20 von 36 Ergebnissen
|

    Variable DC-link voltage source inverter for reactive power compensation in single phase 25 kV AC railway systems

    Haederli, Christoph / Ladoux, Philippe / Meynard, Thierry | Tema Archiv | 2007
    A new concept for reactive power compensation in single phase AC railway systems (in particular 25 kV high speed railway systems) is ...
    Verlag: Mesago PCIM , Stuttgart

    Two-phase boost converter for 14 V/42 V automotive applications using coupled tapped inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2008
    optimum of 50 %. The proposed converter can therefore be an attractive solution for the 14 V / 42 V automotive power net in particular for ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Three phase power factor correction front-end for variable frequency networks

    Groke, Holger / Christ, Timo / Orlik, Bernd et al. | Tema Archiv | 2008
    is varying between 90 VRMS and 130 VRMS at frequencies between 360 Hz and 800 Hz. In order to realize a power factor corrected front end for ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Soft-switching converter using current controlled non-linear inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2007
    A novel soft-switched multi-phase converter for the 42 V/14 V automotive electrical power system has been built and tested. Switching ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Small permanent magnet synchronous motor technology - An overview

    Iles, D. | Tema Archiv | 2008
    Verlag: Mesago PCIM , Stuttgart

    Semiconductors in hybrid drives applications - A survey lecture

    Graf, Ingo / Münzer, Mark Nils | Tema Archiv | 2008
    Hybrid electrical vehicles (HEV) have the potential to save energy in the automobile. Beside the power semiconductor devices used for the ...
    Verlag: Mesago PCIM , Stuttgart

    Resonant motor drive topology with standard modules for electric vehicles

    Frisch, Michael | Tema Archiv | 2008
    The paper presents the development of an electrical motor drive for a commercial application. Different technical solutions for the ...
    Verlag: Mesago PCIM , Stuttgart

    Prediction and measurement of common mode EMI influence on high side current measurements

    Spang, M. / Fischer, T. / Schubert, G. et al. | Tema Archiv | 2007
    of the needed input filter decreases with the component mismatch. The decreasing common mode attenuation is a problem for a lot of ...
    Verlag: Mesago PCIM , Stuttgart

    Power loss consideration of SMPS transformers for hybrid vehicles

    Faust, Christian / Kutschker, Martin / Herzog, Hans-Georg | Tema Archiv | 2008
    The increasing environmental awareness and the shortage of fossil fuels are pushing the development of hybrid vehicles. For the bi ...
    Verlag: Mesago PCIM , Stuttgart

    Power electronic converter for hybrid-drive systems

    Renken, Folker | Tema Archiv | 2008
    power train and board-net structures for hybrid drive systems are presented. In this context the system efficiency of a typical mild-hybrid ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Performance computations of direct drive high power permanent magnet synchronous machines with different rotor and stator structures for locomotive traction application

    Mirzaei, Mehran / Binder, Andreas / Qu, Yanqing | Tema Archiv | 2009
    An analysis of 1 MW permanent magnet (PM) synchronous machines for a 4 MW locomotive application is presented. The motors are of direct ...
    Verlag: Mesago PCIM , Stuttgart

    Optimised induction motor drive for automotive applications

    Graovac, Dusan / Kiep, Andreas / Pürschel, Marco | Tema Archiv | 2007
    The aim of this paper is to present an optimisation method for designing a power electronics inverter for an induction motor drive in ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    New transfer-mold power module series for automotive power-train inverters

    Ishihara, M. / Hiyama, K. / Yamada, K. et al. | Tema Archiv | 2012
    This paper presents a new Transfer-mold Power Module (T-PM) series (called J-Series TPM) dedicated for automotive Power-Train inverter and ...

    New module concepts exclusively built with low temperature joining technique for single- and double-sided cooling

    Schulze, Elisabeth / Mertens, Christian / Lindemann, Andreas | Tema Archiv | 2010
    Joining Technique are analyzed with respect to adaptability for automotive power modules. A new idea for building double side cooled power ...
    Schlagwörter: Leistungselektronik

    Low temperature joining technique - A solution for automotive power electronics

    Schulze, Elisabeth / Mertens, Christian / Lindemann, Andreas | Tema Archiv | 2009
    a new concept for power electronic modules is presented in this paper. At first the state of the technology of the Low Temperature Joining ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    LED-driver with integrated dimming feature and its influence on chromaticity values

    Thomas, Werner / Pforr, Johannes | Tema Archiv | 2009
    determine their influence on LED color-stability. A boost converter with integrated LED dimming feature has been built for an automotive daytime ...
    Verlag: Mesago PCIM , Stuttgart

    Investigation of load profiles for power electronic converters in cars with fuel-cell based auxiliary power units

    Teichert, Christian / Lindemann, Andreas | Tema Archiv | 2008
    for modelling of the components of the vehicle electrical system. From the energy balance, current ratings of the power electronic converters ...
    Verlag: Mesago PCIM , Stuttgart

    From vehicle drive cycle to reliability testing of power modules for hybrid vehicle inverter

    Thoben, M. / Mainka, K. / Bayerer, R. et al. | Tema Archiv | 2008
    power semiconductors, usually packaged in a module, are used. To qualify such power modules for the use in HEV amongst others power cycling and ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Leistungselektronik

    Filter design optimization of an automotive multi-phase converter using coupled inductors

    Stadler, Michael / Pforr, Johannes | Tema Archiv | 2009
    The stringent automotive EMI specifications may result in bulky and expensive filter components. Therefore a cost model for the filter ...
    Verlag: Mesago PCIM , Stuttgart
    Schlagwörter: Kfz-Elektronik

    Facing high thermal loads on power modules in Hybrid Electrical Vehicles

    Christmann, Andre / Mainka, Krzysztof | Tema Archiv | 2010
    In automotive industry the IEC standard Q100/101 is used as a guideline for stress testing and reliability requirements. The launch of ...