Instrumented impact strength tests have been carried out on KV sub-size Charpy samples drawn from A356 aluminium alloy 17-in. wheels, produced by a low-pressure die casting. The wheels show different geometry and thermal treatment. In this paper, the effects of microstructure and defects on the impact properties are studied. The results indicate that the impact energy is lower in as-cast wheel than in T6 heat-treated wheels. A finer microstructure always corresponds to higher impact strength, while a direct correlation between the resistance to crack propagation values and secondary dendrite arm spacing (SDAS) exists. Casting defects, revealed by means of X-ray and density measurements techniques, become critical when concentrated around the V-notch, where they reduce the load bearing area of Charpy specimens. The fracture profile and surface of Charpy specimens have been investigated revealing how the crack crosses the interdendritic eutectic region where a significant fraction of cracked eutectic silicon and intermetallic particles is found. Numerical simulations have been performed to study the filling and solidification behaviour of the alloy of the wheels analysed, in order to predict the final microstructure and shrinkage formation. Solidification times, estimated by means of SDAS measurements and calculated with a numerical simulation approach, show a good correspondence. Critical areas, as concern hot spots and shrinkage porosities, are generally revealed in the zone of the wheels between the spoke and the rim, as well as in the rim area.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Impact behaviour of A356 alloy for low-pressure die casting automotive wheels


    Additional title:

    Schlagfestigkeit der Legierung A356 für niederdruckgegossene Automobilräder


    Contributors:

    Published in:

    Publication date :

    2009


    Size :

    14 Seiten, 18 Bilder, 2 Tabellen, 24 Quellen




    Type of media :

    Article (Journal)


    Type of material :

    Print


    Language :

    English




    Low Cycle Fatigue of A356-T6 Cast Aluminum Alloy Wheels

    Mahoney, B. J. / Fossman, R. G. / Stephens, R. I. | SAE Technical Papers | 1988


    Rationale and Methodology for Straightening A356-T6 Wheels

    Archibald, Ken / Archibald, Kyle / Neubauer, Donald | British Library Conference Proceedings | 2016


    Rationale and Methodology for Straightening A356-T6 Wheels

    Neubauer, Donald / Archibald, Ken / Archibald, Kyle | SAE Technical Papers | 2016


    Ultra-High Speed Machining of A356-T6 Aluminum Alloy for Automotive Applications

    Ng, E-G. / Elbestawi, M. A. / Dumitrescu, M. et al. | British Library Conference Proceedings | 2004


    Ultra-High Speed Machining of A356-T6 Aluminum Alloy for Automotive Applications

    Ng, Eu-Gene / Dumitrescu, Mihaela / Elbestawi, Mohamed A. | SAE Technical Papers | 2004