A key source of safety and infrastructure issues for operations of longer combination vehicles (LCVs) is off-tracking, which has been used to refer to the general phenomenon that the rear wheels of a truck do not follow the track of the front wheels and wander off the travel lane. In this paper, the authors examine the effectiveness of command-steering in reducing off-tracking during a 90-degree turn at low and high speeds in an articulated system with a tractor and three full trailers. In command steering, rear front axles of the trailers are steered proportionately to the articulation angle between the tractor and trailing units. We then consider several control strategies to minimize off-tracking and rearward amplification of this system. A minimum rearward amplification ratio (RWA), as a surrogate for minimum off tracking, has been used as the control criterion for medium to high speeds to arrive at an optimal linear quadratic regulator (LQR) controller. As for low speeds, the maximum radial offset between the tractor and trailer 3 is minimized in the design of the controller. Robustness of the optimal controller with respect to tyre-parameter perturbations is then examined. Based on the simulation results, we find that, active command steering is very effective in reducing off tracking at low- as well as high-speed 90-degree turns. To achieve acceptable levels of RWA and off tracking, at least two of the three trailers must be actively command-steered. Among the three two-trailer-steering possibilities, actively steering trailers 1 and 2 is most cost-effective and results in the lowest RWA for medium- to high-speeds (at which RWA is important), and off-tracking is practically eliminated for all speed regimes considered.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Active command-steering control of tractor and three full trailers for tractor-track following


    Additional title:

    Aktive Führungslenksteuerung einer Zugmaschine mit drei vollen Anhängern für die Spureinhaltung


    Contributors:


    Publication date :

    2006


    Size :

    13 Seiten, 10 Quellen



    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English