Underwater wet welding has been used as an option for the repair of offshore platforms. Rutile-grade electrodes are typically used to carry out the underwater repairs because of their good arc stability, bead apperance, and bead morphology. However, the main problems to overcome are porosity and reduction of toughness and strength as the water depth increases. During wet welding, the welding arc decomposes water into hydrogen and oxygen, which results in the formation of oxides and pores inthe weld metal. The loss of alloying elements in the oxidation process and the fast cooling rate due to the quenching effect of water surrounding the weld arc responsible for the deterioration in mechanical properties. This paper presents evidence of toughness improvements on wet welds made with experimental rutile-grade electrodes. Experimental electrodes with nickel added to the flux covering (0, 1.2, 2.3. and 3.0 wt. pct.) were extruded. A commercial rutile electrode was used for comparison. Bead-on-plate and multipass V-groove wet welds were made at 1 ft. water depth in fresh water. Charpy impact test specimens were machined from the V-groove weld and tested at four temperatures. The toughness measured at -50 deg C of wet welds with 3.0 wt. pct. nickel was improved by a factor of four over the wet welds without nickel content. Smaller improvements were obtained with 2.3 wt. pct. nickel at -50 degC. After higher temperatures, the toughness did not increase with nickel addition. All-weld-metal reduced-size tensile specimens made from the wet welds deposited with the commercial and experimental electrodes presented similar yield and tensile strength. The tensile specimen with 3.0 wt.pct. nickel presented lower ductility.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Effect of nickel on toughness of underwater wet welds


    Additional title:

    Einfluß von Nickel auf die Bruchzähigkeit von Unterwasserschweißungen


    Contributors:
    Perez, F. (author) / Liu, S. (author) / Smith, C. (author) / Rodriguez, E. (author)


    Publication date :

    2003


    Size :

    6 Seiten, 13 Bilder, 5 Tabellen, 9 Quellen



    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    On cooling of underwater welds

    Hasui, A. / Suga, Y. | Tema Archive | 1979


    On cooling of underwater welds

    Hasui, A. / Suga, Y. | Tema Archive | 1980


    Robots to inspect welds underwater

    Kenzie, B. | Tema Archive | 1994


    Fracture toughness estimation for pipeline girth welds

    Pisarski, H.G. / Wignall, C.M. | Tema Archive | 2002


    Fracture toughness testing of pipeline girth welds

    Shen, G. / Gianetto, J.A. / Bouchard, R. et al. | Tema Archive | 2004