At CERN, radiation surveys of equipment and beam lines are important for safety and analysis throughout the accelerator complex. Radiation measurements are highly dependent on the distance between the sensor and the radiation source. If this distance can be accurately established, the measurements can be used to better understand the radiation levels of the components and can be used for calibration purposes. When surveys are undertaken by the Train Inspection Monorail (TIM) robot, the sensor is at a constant distance from the rail, which means that it is at a known distance and height from the centre of the beam line. However, the distance of the sensor to the closest surface of the beam line varies according to what kind of equipment is installed on the beam line at this point. Ideally, a robotic survey would be completed with online adaption of the sensor position according to the equipment present in the LHC. This new approach establishes a scan of the surface with a 2D LiDAR while moving along the tunnel axis in order to obtain a 3D scan of the environment. This 3D scan will be used to generate online trajectories that will allow the robot to accurately follow the beam line and thus measure the radiation levels.
Adaptive Radiation Survey Using an Autonomous Robot Executing LiDAR Scans in the Large Hadron Collider
Springer Proceedings in Advanced Robotics
The International Symposium of Robotics Research ; 2022 ; Geneva, Switzerland September 25, 2022 - September 30, 2022
2023-03-08
9 pages
Article/Chapter (Book)
Electronic Resource
English
The Large Hadron Collider Project
British Library Conference Proceedings | 2006
|CONTROL SYSTEM FOR AUTONOMOUS DRIVING ROBOT USING LIDAR APPARATUS
European Patent Office | 2018
|