This study presents a computational fluid dynamics (CFD) based approach to determine the optimal positioning for an atmospheric turbulence sensor on a rotary-wing uncrewed aerial vehicle (UAV) with X8 configuration. The vertical ( z B F ) and horizontal ( x B F ) distances of the sensor to the UAV center to reduce the effect of the propeller-induced flow are investigated by CFD simulations based on the k ϵ turbulence model and the actuator disc theory. To ensure a realistic geometric design of the simulations, the tilt angles of a test UAV in flight were measured by flying the drone along a fixed pattern at different constant ground speeds. Based on those measurement results, a corresponding geometry domain was generated for the CFD simulations. Specific emphasis was given to the mesh construction followed by a sensitivity study on the mesh resolution to find a compromise between acceptable simulation accuracy and available computational resources. The final CFD simulations (twelve in total) were performed for four inflow conditions (2.5 m s−1, 5 m s−1, 7.5 m s−1 and 10 m s−1) and three payload configurations (15 kg, 20 kg and 25 kg) of the UAV. The results depend on the inflows and show that the most efficient way to reduce the influence of the propeller-induced flow is mounting the sensor upwind, pointing along the incoming flow direction at x B F varying between 0.46 and 1.66 D, and under the mean plane of the rotors at z B F between 0.01 and 0.7 D. Finally, results are then applied to the possible real-case scenario of a Foxtech D130 carrying a CSAT3B ultrasonic anemometer, that aims to sample wind with mean flows higher than 5 m s−1. The authors propose x B F = 1.7   m and z B F = 20   c m below the mean rotor plane as a feasible compromise between propeller-induced flow reduction and safety. These results will be used to improve the design of a novel drone-based atmospheric turbulence measurement system, which aims to combine accurate wind and turbulence measurements by a research-grade ultrasonic anemometer with the high mobility and flexibility of UAVs as sensor carriers.


    Access

    Download


    Export, share and cite



    Title :

    Flow Structure around a Multicopter Drone: A Computational Fluid Dynamics Analysis for Sensor Placement Considerations


    Contributors:


    Publication date :

    2023




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    Unknown




    Multicopter Drone

    PARK CHUL | European Patent Office | 2019

    Free access

    MULTICOPTER DRONE DEVICE

    KWANJUNG YEE / DAEJIN LIM / SOONMOUNG KWON et al. | European Patent Office | 2021

    Free access

    DRONE PROTECTION GUARD AND MULTICOPTER DRONE HAVING THE SAME

    CHANG SEOUNG KI / CHANG LEE JUN | European Patent Office | 2023

    Free access

    Annoyance Factors of a Maneuvering Multicopter Drone

    Gallo, Erica / Beaulieu, Guillaume / Schram, Christophe F. | British Library Conference Proceedings | 2022


    Annoyance Factors of a Maneuvering Multicopter Drone

    Gallo, Erica / Beaulieu, Guillaume / Schram, Christophe F. | TIBKAT | 2022