1–50 von 2,998 Ergebnissen
|

    Belüftungsregelung zur effizienten Aufheizung des Fahrzeuginnenraums

    Markowitz, Markus | Tema Archiv | 2012
    Zur effizienten Aufheizung des Fahrzeuginnenraums unter Kaltbedingungen wurde in der Belüftungsregelung der Klimaautomatik eine Funktion ...
    Schlagwörter: Kühlkreislauf

    Sustainable Air Conditioing with District Cooling System (DCS)

    Pillai, Reji Kumar / Suri, Reena / Kundu, Suddhasatta et al. | Springer Verlag | 2022
    defeated by sheer increase in the number of air conditioners. Radical approaches are required to address the cooling challenge. District Cooling ...
    Schlagwörter: Power Electronics, Electrical Machines and Networks , Measurement Science and Instrumentation , Energy Policy, Economics and Management , Circuits and Systems

    Peltier integrated heating & cooling jacket

    Poikayil, Jeena Raju / Francis, Jeffy / Saju, Deepa et al. | IEEE | 2017
    such illness caused due to climate changes and unexpected heating or cooling effects. This system is thus an efficient and adamant solution to ...

    Development, analysis and application of a predictive controller to a small-scale district heating system

    Freier Zugriff
    Saletti C. / Gambarotta A. / Morini M. | BASE | 2020
    District heating and cooling networks have great potential for energy saving, efficient thermal energy distribution and renewable energy ...
    Schlagwörter: District heating and cooling network

    Research on Heat Dissipation Performance of Automobile Motor Based on Heat Pipe Optimization Design

    Ou, Chunguo / Yang, Chunyun / Tan, Gangfeng et al. | SAE Technical Papers | 2022
    optimization design based on a drive motor heat dissipation scheme is proposed, and the overall stability of the motor working under high temperature ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical and Experimental Investigation on Heat Exchange Performance for Heat Dissipation Module for Construction Vehicles

    Liu, Jiaxin / He, Shumo / Qin, Sicheng et al. | SAE Technical Papers | 2017
    dissipation module under varied working conditions. The module in the XD132 consists of a cooling fan and three radiators. At first, the numerical ...
    Verlag: Society of Automotive Engineers , SAE International

    Energy Efficiency Impact of Localized Cooling/Heating for Electric Vehicle

    Ghosh, Debashis / Wolfe, Edward / Bozeman, Jeffrey et al. | SAE Technical Papers | 2015
    cooling/heating system. Components in the localized system use thermoelectric (TE) devices to target the occupant's chest, face, lap and foot ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Heat dissipation assembly of electric water pump and cooling fan

    Freier Zugriff
    XIAO JIE | Europäisches Patentamt | 2020

    The invention discloses a heat dissipation assembly of an electric water pump and a cooling fan. The heat dissipation assembly comprises

     ...

    Cooling and Heating Performance Improvement of Enhanced Climate Control Seats

    Lee, Daewoong / Lee, Eunwoung | Springer Verlag | 2018
    (CCSs) using a Heating, Ventilation and Air-conditioning system (HVAC). CCSs are being vigorously developed because demands on passengers ...

      Cooling and Heating Performance Improvement of Enhanced Climate Control Seats

      Lee, Daewoong / Lee, Eunwoung | Online Contents | 2018
      . Nevertheless, current CCSs–thermo-electric devices (TED) that have been applied for both heating and cooling systems, have been used in limited luxury ...

    Micro-Cooling/Heating Strategy for Energy Efficient HVAC System

    Khalighi, Bahram / Chen, Kuo-huey / Kaushik, Shailendra et al. | SAE Technical Papers | 2011
    improvements in an HVAC system through micro-cooling/heating strategies and (b) validation of an analytical approach developed in GM that would support ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Stator Surface Area on Braking Torque and Wall Heat Dissipation of Magnetorheological Fluid Retarder

    Tan, Gangfeng / Frimpong, Justice / Zhou, Mi et al. | SAE Technical Papers | 2020
    heat dissipation. In this study, the relationship between the braking torque of the MRF retarder and the stator surface area of the retarder ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of Cooling Air Flow for Improved Heat Dissipation through Radiator

    Aher, Amit / Palve, Chandrakant / Thakur, Paurnima et al. | SAE Technical Papers | 2024
    Engine cooling system, which will ensure optimum operating range of internal combustion engine through precise control on coolant flow rate by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Numerical and Experimental Research on Flow Resistance of Cool Medium from Heat Dissipation System for Construction Vehicles

    Wang, Baozhong / Long, Haiyang / Liu, Jiaxin et al. | SAE Technical Papers | 2018
    research target to seek out the effect of air flow resistance on the performance of its heat dissipation system. For a start, a simplified 3D model ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Untersuchungen zu einem optimierten Kühlsystem

    Kuthada, T. / Genger, M. / Widdecke, N. et al. | Tema Archiv | 2004
    Schlagwörter: Kühlsystem , Kühlung

    Experimental Investigation on the Influence of Pressure Wheel Design on Heat Dissipation for a Laser Robotic End of Arm Tooling

    Hamieh, Abdallah / Jawad, Badih / Liu, Liping et al. | SAE Technical Papers | 2018
    The initiative of this paper is focused on improving the heat dissipation from the pressure wheel of a laser welding assembly in order to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Experimental study on automotive cooling and heating air conditioning system using CO2 as a refrigerant

    Tamura, Tomoichiro / Yakumaru, Yuuichi / Nishiwaki, Fumitoshi | Tema Archiv | 2005
    instead of an electric heater. Based on this concept, the authors aimed to develop an effective automotive cooling and heating air conditioning ...
    Schlagwörter: Kühlung

    Performance optimization of ground water heat pump system for space heating and cooling applications

    Krishnan, Murugesan / Salalagaon, Mahalingesh / Thomas, Hywel | TIBKAT | 2020

    Analysis of Passive Low Power Phase Change Heat Dissipation Method for Electric Vehicle Motor

    Tan, Gangfeng / Quan, Jiakang / Kuang, Jianjie et al. | SAE Technical Papers | 2019
    large and the reliability is poor. In order to solve this problem, this paper proposes a heat dissipation method to improve the reliability and ...
    Verlag: Society of Automotive Engineers , SAE International

    A Thermal Energy Operated Heating/Cooling System for Buses

    Teng, Ho | SAE Technical Papers | 2010
    The passenger cabin heating and cooling has a considerable impact on the fuel economy for buses, especially during the waiting period. This ...
    Verlag: Society of Automotive Engineers , SAE International

    Testing a 50kW ORC at Different Heating and Cooling Source Conditions to Map the Performance Characteristics

    Lin, Chuen-Sen / Johnson, Thomas / Avadhanula, Vamshi K. | SAE Technical Papers | 2013
    -liquid heat exchanger. In the present work performance test was conducted on a 50 kW ORC power unit under different heating and cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Heat Dissipation with Heat Pipe Using Particle Swarm Optimization and Being Used for High Power LED

    Zhongliang, Pan / Ling, Chen | Springer Verlag | 2022
    increase. Therefore, in order to ensure the reliability of electronic components, heat dissipation treatment must be carried out, and heat pipe ...
    Schlagwörter: Heat dissipation method , Transportation Technology and Traffic Engineering , Control and Systems Theory

    International Astronautical Congress

    Engineering Index Backfile | 1957
    Evolving on Planet, A.E.SLATER; Design and Performance Data of Space Ships with Ionic Propulsion Systems, E.STUHLINGER: U.S. Army Support of ...

    Mathematical modeling and validation of cooling/heating effects in thermoelectric module coupled with heat sinks

    Korprasertsak, Nataporn / Leephakpreeda, Thananchai | IEEE | 2016
    Lumped parameter models of a thermoelectric module coupled with heat sinks are developed for assessment of cooling/heating performances in ...

    Temperature Control of Water with Heating, Cooling and Mixing in a Process with Recycle Loop

    Wu, Hai / Li, Meng-Feng / Chen, Wen et al. | SAE Technical Papers | 2014
    is controlled by a heating, cooling and mixing process with individual valves regulating the flow-rate of saturated steam, chilled water and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    5th International Automobile Congress

    Engineering Index Backfile | 1954
    Construction on Passenger Car Design, H.GLAUBITZ, p 885-90; Heating of Shock Absorbers When in Service, P.KOESSLER, H.J.BEERMANN, p 891-4 ...

    Heat Dissipation Considerations of a Horizontal Take-off Launcher During Re-entry into the Earth's Atmosphere

    Cheng, H. / Defence Science and Technology Organisation (Australia); Royal Aeronautical Society; Institution of Engineers Australia | British Library Conference Proceedings | 2011

    Modelling of the frictional heating in brake system with thermal resistance on a contact surface and convective cooling on a free surface of a pad

    Yevtushenko, A.A. / Kuciej, M. / Yevtushenko, O. | Tema Archiv | 2015
    braking with a constant deceleration has been formulated. The thermal resistance on a contact surface and convective cooling on a free surface of ...

    Simulation and Optimization on Oscillating Cooling Characteristics in High-Enhanced Piston Oil Cooling Gallery

    Dong, Fei / Ni, Jie / Zong, Mingjing et al. | SAE Technical Papers | 2017
    Oscillating cooling characteristics in piston oil cooling gallery of internal combustion engines were simulated by adopting Coupled Level ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    Experimental Study of a 1 kW Thermoelectric Module Heat Exchanger for Vehicle: Cabin Cooling and Heating Application

    Lee, Daewoong / Hwang, Seungyong | Springer Verlag | 2022
    and water cooling jacket, attached on the thermoelectric modules both hot and cold side. The cooling and heating performance experiment was ...
    Schlagwörter: Cooling capacity , Heating capacity

    Heating, Ventilating, and Cooling of Passenger Cars

    Chase, Herbert | SAE Technical Papers | 1940
    comparative study of existing heating, ventilating, and cooling systems. Some 1939 and many more 1940 car models, he believes, yield greatly improved ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Windows and windshields

    DCT270 on demand clutch cooling and lubrication system

    Mughal,S. / Changan UK Res.a.Dev.Centre,GB | Kraftfahrwesen | 2015

    Predicting Thermal Distortion Issue during Heating and Cooling of Car Bodies Inside a Paint Shop Oven Using CAE/FEA

    Lakic, Alex / Buckley, Michael / Silvester, Sajeev | SAE Technical Papers | 2015
    Dimensional distortion, cosmetic distortion issues can arise during heating and cooling in the paint shop processing of car bodies. A car ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Tools and equipment , Coatings, colorants, and finishes

    Moon pool heating system for polar region ship, ship and heating method

    Freier Zugriff
    YAN FENGQUAN / LIN WENLI / ZENG WEI | Europäisches Patentamt | 2023
    cooling system; the steam heater is communicated with the central heat exchanger and is used for heating the seawater subjected to heat exchange ...

    Heating Buildings with Excess Heat from Hybrid Vehicles

    Gullberg, M. / International Symposium on Automotive Technology and Automation | British Library Conference Proceedings | 1999

    Improving Engine Pre-Start And After-Start Heating by Using the Combined Heating System

    Gritsuk, Igor / Verbovskiy, Valeriy / Mateichyk, Vasyl et al. | SAE Technical Papers | 2016
    to accumulate the thermal energy. The results of experimental studies of the combined heating system are shown. A system and methods for pre ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Improving Performance of Heating, Ventilation, and Air-Conditioning System of Electric Vehicle Using Evaporative Cooling: A Model-Based Analysis

    Shandilya, Anant / Melby, Grayson / Ranjan, Sant et al. | SAE Technical Papers | 2021
    , a cooling methodology based on direct evaporative cooling (DEC) is introduced, and the benefits of such a technique are illustrated by the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Study on Driving Forms and Control of Engine Cooling Fan

    Shangguan, Wenbin / Wang, Xihui / Wang, Xinling et al. | SAE Technical Papers | 2023
    The influence of engine cooling fan on the working state of engine cooling system under different driving forms and control strategy is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Simulation and modeling

    On-System Engine Cooling Fan Measurement as a Tool for Optimizing Cooling System Airflow Performance and Noise

    Sortor, Michael | SAE Technical Papers | 2011
    specification of the cooling fan, the heat exchangers, and the associated electrical loads. The simplest method of expressing the engine cooling fan ...
    Verlag: Society of Automotive Engineers , SAE International

    ROTATIONAL EFFECTS ON FILM COOLING PERFORMANCE-SIMULATION OF A LOUVER COOLING SCHEME ON A ROTATING TURBINE BLADE

    Hassan, I. / Zhang, X.-Z. / International Society for Air Breathing Engines | British Library Conference Proceedings | 2009
    Verlag: American Institute of Aeronautics and Astronautics , Reston, VA

    Integrated Technology Based on Thermal Storage to Reduce Trucks Idling for Overnight Heating or Cooling

    Bilodeau, Stéphane | SAE Technical Papers | 2005
    air conditioning. The heating ventilating and air conditioning systems (HVAC systems) in use today on internal combustion vehicles do not lend ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effect of Charge Cooling on the RON of Ethanol/Gasoline Blends

    Dryer, Frederick L. / da Silva, Gabriel / Morganti, Kai J. et al. | SAE Technical Papers | 2013
    This paper examines the effect of charge cooling on the Research Octane Number (RON) of ethanol/gasoline blends. While gasoline is fully ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development

    Aerodynamic Drag and Engine Cooling Effects on Class 8 Trucks in Platooning Configurations

    Gargoloff, Joaquin Ivan / Ellis, Matthew / Sengupta, Raja | SAE Technical Papers | 2015
    reduction, this paper also highlights the adverse impact of platooning on the engine cooling performance in trailing vehicles, due to the reduction ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of modular district heating system for selected public buildings and neighborhoods in Visoko with mechanical structure optimization of solar collector holders — The CoolHeating project

    Petrovic, Marin / Babic, Amra / Fejzovic, Emir | IEEE | 2018
    Small modular district heating/cooling grids can be fed by different heat sources, including from solar collectors, biomass systems and ...

    Predicting Thermal Distortion Issue during Heating and Cooling of Car Bodies Inside a Paint Shop Oven Using CAE/FEA

    Silvester, S. / Lakic, A. / Buckley, M. et al. | British Library Conference Proceedings | 2015

    00INT003 Advanced Cooling/Heating Concepts in US Army Vehicle Systems

    Patil, A. S. / Manzione, J. / Bolton, C. | British Library Conference Proceedings | 2000

    Sensitivity Study on Brake Cooling Performance

    Sun, Hongguang | SAE Technical Papers | 2006
    “hot judder” has been observed. This study examined the effects of changes to a brake system and its environment on the brake equilibrium ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Propellers and rotors