1–50 von 3,024 Ergebnissen
|

    Belüftungsregelung zur effizienten Aufheizung des Fahrzeuginnenraums

    Markowitz, Markus | Tema Archiv | 2012
    Zur effizienten Aufheizung des Fahrzeuginnenraums unter Kaltbedingungen wurde in der Belüftungsregelung der Klimaautomatik eine Funktion ...
    Schlagwörter: Kühlkreislauf

    Sustainable Air Conditioing with District Cooling System (DCS)

    Pillai, Reji Kumar / Suri, Reena / Kundu, Suddhasatta et al. | Springer Verlag | 2022
    defeated by sheer increase in the number of air conditioners. Radical approaches are required to address the cooling challenge. District Cooling ...
    Schlagwörter: Power Electronics, Electrical Machines and Networks , Measurement Science and Instrumentation , Energy Policy, Economics and Management , Circuits and Systems

    Peltier integrated heating & cooling jacket

    Poikayil, Jeena Raju / Francis, Jeffy / Saju, Deepa et al. | IEEE | 2017
    such illness caused due to climate changes and unexpected heating or cooling effects. This system is thus an efficient and adamant solution to ...

    Development, analysis and application of a predictive controller to a small-scale district heating system

    Freier Zugriff
    Saletti C. / Gambarotta A. / Morini M. | BASE | 2020
    District heating and cooling networks have great potential for energy saving, efficient thermal energy distribution and renewable energy ...
    Schlagwörter: District heating and cooling network

    Research on Heat Dissipation Performance of Automobile Motor Based on Heat Pipe Optimization Design

    Ou, Chunguo / Yang, Chunyun / Tan, Gangfeng et al. | SAE Technical Papers | 2022
    optimization design based on a drive motor heat dissipation scheme is proposed, and the overall stability of the motor working under high temperature ...
    Verlag: Society of Automotive Engineers , SAE International

    Numerical and Experimental Investigation on Heat Exchange Performance for Heat Dissipation Module for Construction Vehicles

    Liu, Jiaxin / He, Shumo / Qin, Sicheng et al. | SAE Technical Papers | 2017
    dissipation module under varied working conditions. The module in the XD132 consists of a cooling fan and three radiators. At first, the numerical ...
    Verlag: Society of Automotive Engineers , SAE International

    Energy Efficiency Impact of Localized Cooling/Heating for Electric Vehicle

    Ghosh, Debashis / Wolfe, Edward / Bozeman, Jeffrey et al. | SAE Technical Papers | 2015
    cooling/heating system. Components in the localized system use thermoelectric (TE) devices to target the occupant's chest, face, lap and foot ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Heat dissipation assembly of electric water pump and cooling fan

    Freier Zugriff
    XIAO JIE | Europäisches Patentamt | 2020

    The invention discloses a heat dissipation assembly of an electric water pump and a cooling fan. The heat dissipation assembly comprises

     ...

    Cooling and Heating Performance Improvement of Enhanced Climate Control Seats

    Lee, Daewoong / Lee, Eunwoung | Springer Verlag | 2018
    (CCSs) using a Heating, Ventilation and Air-conditioning system (HVAC). CCSs are being vigorously developed because demands on passengers ...

      Cooling and Heating Performance Improvement of Enhanced Climate Control Seats

      Lee, Daewoong / Lee, Eunwoung | Online Contents | 2018
      . Nevertheless, current CCSs–thermo-electric devices (TED) that have been applied for both heating and cooling systems, have been used in limited luxury ...

    Micro-Cooling/Heating Strategy for Energy Efficient HVAC System

    Khalighi, Bahram / Chen, Kuo-huey / Kaushik, Shailendra et al. | SAE Technical Papers | 2011
    improvements in an HVAC system through micro-cooling/heating strategies and (b) validation of an analytical approach developed in GM that would support ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Stator Surface Area on Braking Torque and Wall Heat Dissipation of Magnetorheological Fluid Retarder

    Tan, Gangfeng / Frimpong, Justice / Zhou, Mi et al. | SAE Technical Papers | 2020
    heat dissipation. In this study, the relationship between the braking torque of the MRF retarder and the stator surface area of the retarder ...
    Verlag: Society of Automotive Engineers , SAE International

    Optimization of Cooling Air Flow for Improved Heat Dissipation through Radiator

    Aher, Amit / Palve, Chandrakant / Thakur, Paurnima et al. | SAE Technical Papers | 2024
    Engine cooling system, which will ensure optimum operating range of internal combustion engine through precise control on coolant flow rate by ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Engine cooling systems

    Numerical and Experimental Research on Flow Resistance of Cool Medium from Heat Dissipation System for Construction Vehicles

    Wang, Baozhong / Long, Haiyang / Liu, Jiaxin et al. | SAE Technical Papers | 2018
    research target to seek out the effect of air flow resistance on the performance of its heat dissipation system. For a start, a simplified 3D model ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Untersuchungen zu einem optimierten Kühlsystem

    Kuthada, T. / Genger, M. / Widdecke, N. et al. | Tema Archiv | 2004
    Schlagwörter: Kühlsystem , Kühlung

    Experimental study on automotive cooling and heating air conditioning system using CO2 as a refrigerant

    Tamura, Tomoichiro / Yakumaru, Yuuichi / Nishiwaki, Fumitoshi | Tema Archiv | 2005
    instead of an electric heater. Based on this concept, the authors aimed to develop an effective automotive cooling and heating air conditioning ...
    Schlagwörter: Kühlung

    Experimental Investigation on the Influence of Pressure Wheel Design on Heat Dissipation for a Laser Robotic End of Arm Tooling

    Hamieh, Abdallah / Jawad, Badih / Liu, Liping et al. | SAE Technical Papers | 2018
    The initiative of this paper is focused on improving the heat dissipation from the pressure wheel of a laser welding assembly in order to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Analysis of Passive Low Power Phase Change Heat Dissipation Method for Electric Vehicle Motor

    Tan, Gangfeng / Quan, Jiakang / Kuang, Jianjie et al. | SAE Technical Papers | 2019
    large and the reliability is poor. In order to solve this problem, this paper proposes a heat dissipation method to improve the reliability and ...
    Verlag: Society of Automotive Engineers , SAE International

    Performance optimization of ground water heat pump system for space heating and cooling applications

    Krishnan, Murugesan / Salalagaon, Mahalingesh / Thomas, Hywel | TIBKAT | 2020

    A Thermal Energy Operated Heating/Cooling System for Buses

    Teng, Ho | SAE Technical Papers | 2010
    The passenger cabin heating and cooling has a considerable impact on the fuel economy for buses, especially during the waiting period. This ...
    Verlag: Society of Automotive Engineers , SAE International

    Testing a 50kW ORC at Different Heating and Cooling Source Conditions to Map the Performance Characteristics

    Lin, Chuen-Sen / Johnson, Thomas / Avadhanula, Vamshi K. | SAE Technical Papers | 2013
    -liquid heat exchanger. In the present work performance test was conducted on a 50 kW ORC power unit under different heating and cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Heat Dissipation with Heat Pipe Using Particle Swarm Optimization and Being Used for High Power LED

    Zhongliang, Pan / Ling, Chen | Springer Verlag | 2022
    increase. Therefore, in order to ensure the reliability of electronic components, heat dissipation treatment must be carried out, and heat pipe ...
    Schlagwörter: Heat dissipation method , Transportation Technology and Traffic Engineering , Control and Systems Theory

    Temperature Control of Water with Heating, Cooling and Mixing in a Process with Recycle Loop

    Wu, Hai / Li, Meng-Feng / Chen, Wen et al. | SAE Technical Papers | 2014
    is controlled by a heating, cooling and mixing process with individual valves regulating the flow-rate of saturated steam, chilled water and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Mathematical modeling and validation of cooling/heating effects in thermoelectric module coupled with heat sinks

    Korprasertsak, Nataporn / Leephakpreeda, Thananchai | IEEE | 2016
    Lumped parameter models of a thermoelectric module coupled with heat sinks are developed for assessment of cooling/heating performances in ...

    Modelling of the frictional heating in brake system with thermal resistance on a contact surface and convective cooling on a free surface of a pad

    Yevtushenko, A.A. / Kuciej, M. / Yevtushenko, O. | Tema Archiv | 2015
    braking with a constant deceleration has been formulated. The thermal resistance on a contact surface and convective cooling on a free surface of ...

    Heat Dissipation Considerations of a Horizontal Take-off Launcher During Re-entry into the Earth's Atmosphere

    Cheng, H. / Defence Science and Technology Organisation (Australia); Royal Aeronautical Society; Institution of Engineers Australia | British Library Conference Proceedings | 2011

    International Astronautical Congress

    Engineering Index Backfile | 1957
    Evolving on Planet, A.E.SLATER; Design and Performance Data of Space Ships with Ionic Propulsion Systems, E.STUHLINGER: U.S. Army Support of ...

    Simulation and Optimization on Oscillating Cooling Characteristics in High-Enhanced Piston Oil Cooling Gallery

    Dong, Fei / Ni, Jie / Zong, Mingjing et al. | SAE Technical Papers | 2017
    Oscillating cooling characteristics in piston oil cooling gallery of internal combustion engines were simulated by adopting Coupled Level ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Simulation and modeling

    DCT270 on demand clutch cooling and lubrication system

    Mughal,S. / Changan UK Res.a.Dev.Centre,GB | Kraftfahrwesen | 2015

    5th International Automobile Congress

    Engineering Index Backfile | 1954
    Construction on Passenger Car Design, H.GLAUBITZ, p 885-90; Heating of Shock Absorbers When in Service, P.KOESSLER, H.J.BEERMANN, p 891-4 ...

    Experimental Study of a 1 kW Thermoelectric Module Heat Exchanger for Vehicle: Cabin Cooling and Heating Application

    Lee, Daewoong / Hwang, Seungyong | Springer Verlag | 2022
    and water cooling jacket, attached on the thermoelectric modules both hot and cold side. The cooling and heating performance experiment was ...
    Schlagwörter: Cooling capacity , Heating capacity

    Heating, Ventilating, and Cooling of Passenger Cars

    Chase, Herbert | SAE Technical Papers | 1940
    comparative study of existing heating, ventilating, and cooling systems. Some 1939 and many more 1940 car models, he believes, yield greatly improved ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Windows and windshields

    Predicting Thermal Distortion Issue during Heating and Cooling of Car Bodies Inside a Paint Shop Oven Using CAE/FEA

    Lakic, Alex / Buckley, Michael / Silvester, Sajeev | SAE Technical Papers | 2015
    Dimensional distortion, cosmetic distortion issues can arise during heating and cooling in the paint shop processing of car bodies. A car ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Tools and equipment , Coatings, colorants, and finishes

    Moon pool heating system for polar region ship, ship and heating method

    Freier Zugriff
    YAN FENGQUAN / LIN WENLI / ZENG WEI | Europäisches Patentamt | 2023
    cooling system; the steam heater is communicated with the central heat exchanger and is used for heating the seawater subjected to heat exchange ...

    Improving Performance of Heating, Ventilation, and Air-Conditioning System of Electric Vehicle Using Evaporative Cooling: A Model-Based Analysis

    Shandilya, Anant / Melby, Grayson / Ranjan, Sant et al. | SAE Technical Papers | 2021
    , a cooling methodology based on direct evaporative cooling (DEC) is introduced, and the benefits of such a technique are illustrated by the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Study on Driving Forms and Control of Engine Cooling Fan

    Shangguan, Wenbin / Wang, Xihui / Wang, Xinling et al. | SAE Technical Papers | 2023
    The influence of engine cooling fan on the working state of engine cooling system under different driving forms and control strategy is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems , Simulation and modeling

    Improving Engine Pre-Start And After-Start Heating by Using the Combined Heating System

    Gritsuk, Igor / Verbovskiy, Valeriy / Mateichyk, Vasyl et al. | SAE Technical Papers | 2016
    to accumulate the thermal energy. The results of experimental studies of the combined heating system are shown. A system and methods for pre ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    On-System Engine Cooling Fan Measurement as a Tool for Optimizing Cooling System Airflow Performance and Noise

    Sortor, Michael | SAE Technical Papers | 2011
    specification of the cooling fan, the heat exchangers, and the associated electrical loads. The simplest method of expressing the engine cooling fan ...
    Verlag: Society of Automotive Engineers , SAE International

    Heating Buildings with Excess Heat from Hybrid Vehicles

    Gullberg, M. / International Symposium on Automotive Technology and Automation | British Library Conference Proceedings | 1999

    ROTATIONAL EFFECTS ON FILM COOLING PERFORMANCE-SIMULATION OF A LOUVER COOLING SCHEME ON A ROTATING TURBINE BLADE

    Hassan, I. / Zhang, X.-Z. / International Society for Air Breathing Engines | British Library Conference Proceedings | 2009
    Verlag: American Institute of Aeronautics and Astronautics , Reston, VA

    Aerodynamic Drag and Engine Cooling Effects on Class 8 Trucks in Platooning Configurations

    Gargoloff, Joaquin Ivan / Ellis, Matthew / Sengupta, Raja | SAE Technical Papers | 2015
    reduction, this paper also highlights the adverse impact of platooning on the engine cooling performance in trailing vehicles, due to the reduction ...
    Verlag: Society of Automotive Engineers , SAE International

    Integrated Technology Based on Thermal Storage to Reduce Trucks Idling for Overnight Heating or Cooling

    Bilodeau, Stéphane | SAE Technical Papers | 2005
    air conditioning. The heating ventilating and air conditioning systems (HVAC systems) in use today on internal combustion vehicles do not lend ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effect of Charge Cooling on the RON of Ethanol/Gasoline Blends

    Dryer, Frederick L. / da Silva, Gabriel / Morganti, Kai J. et al. | SAE Technical Papers | 2013
    This paper examines the effect of charge cooling on the Research Octane Number (RON) of ethanol/gasoline blends. While gasoline is fully ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development

    Optimization of modular district heating system for selected public buildings and neighborhoods in Visoko with mechanical structure optimization of solar collector holders — The CoolHeating project

    Petrovic, Marin / Babic, Amra / Fejzovic, Emir | IEEE | 2018
    Small modular district heating/cooling grids can be fed by different heat sources, including from solar collectors, biomass systems and ...

    Sensitivity Study on Brake Cooling Performance

    Sun, Hongguang | SAE Technical Papers | 2006
    “hot judder” has been observed. This study examined the effects of changes to a brake system and its environment on the brake equilibrium ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Propellers and rotors