1–50 von 80 Ergebnissen
|

    A New Generation of Adiabatic Blanking Machines for Car Body Components

    Lazzarotto, L. | Tema Archiv | 2014
    Schlagwörter: Stanzen

    Representation and similarity assessment in case-based process planning and die design for manufacturing automotive panels

    You, Chun-Fong / Tsai, Yi-Lung / Liu, Kun-Yu | Tema Archiv | 2010
    Schlagwörter: Stanzen

    Principal component analysis-based image fusion routine with application to automotive stamping split detection

    Zhou, Yi / Mayyas, Ahmad / Omar, Mohammed A. | Tema Archiv | 2011
    Schlagwörter: Stanzen

    Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process

    Bae, G.H. / Song, J.H. / Huh, H. et al. | Tema Archiv | 2007
    Schlagwörter: Stanzen

    Adiabatic blanking of metal sheets: Technological positioning and industrial developments for production

    Lazzarotto, L. / Michon, R. | Tema Archiv | 2008
    Schlagwörter: Stanzen

    A simulation-based design parameter study in the stamping process of an automotive member

    Song, Jung-Han / Huh, Hoon / Kim, Se-Ho | Tema Archiv | 2007
    Schlagwörter: Stanzen

    Using spherical-motion stamping to produce precision components for electric locomotives

    Babushkin, R.A. / Sdobin, V.A. / Saprykin, I.A. | Tema Archiv | 1984
    Schlagwörter: STANZEN

    STX sheets - A family of glass reinforced engineering polymer materials

    Dunning, L. | Tema Archiv | 1975
    Schlagwörter: STANZEN

    Overview of forming and formability issues for high volume aluminum car body panels

    Daniel, Dominique / Guiglionda, Gilles / Litalien, Pierre et al. | Tema Archiv | 2006
    Schlagwörter: Stanzen

    A numerical and experimental study of surface deflections in automobile exterior panels

    Park, C.D. / Chung, W.J. / Kim, B.M. | Tema Archiv | 2007
    Schlagwörter: Stanzen

    Sheet metal forming analyses with an emphasis on the springback deformation

    Firat, Mehmet / Kaftanoglu, Bilgin / Eser, Orhan | Tema Archiv | 2008
    Schlagwörter: Stanzen

    Cost-oriented stamping material and tolerance optimization

    Pletz, D. / Houten, F.J.A.M. van | Tema Archiv | 2006
    Schlagwörter: Stanzen

    A study on the manufacturing process of the muffler tube for heavy equipments

    Han, Kyu-Taek / Kwon, Gi-Tae | Tema Archiv | 2006
    Schlagwörter: Stanzen

    Practical considerations for the stamping of tailor welded blanks

    Ream, S.L. / Blumel, K.W. | Tema Archiv | 2000
    Schlagwörter: Stanzen

    Experimental and numerical assessment of Tailor-Welded Blanks formability

    Gaied, Sadok / Roelandt, Jean-Marc / Pinard, Fabrice et al. | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Coupled sheet metal forming and fatigue simulation

    Roch, Y. le / Berard, J.Y. / Duval, J.L. et al. | Tema Archiv | 1998
    Schlagwörter: Stanzen

    Resistance welding of high-volume aluminum automotive assemblies

    Irving, R.R. | Tema Archiv | 2001
    Schlagwörter: Stanzen

    Computational analysis of injection-molding residual-stress development in direct-adhesion polymer-to-metal hybrid body-in-white components

    Grujicic, M. / Sellappan, V. / Pandurangan, B. et al. | Tema Archiv | 2008
    Schlagwörter: Stanzen

    Innovation in the use of aluminum alloy for forming industrial automotive components

    Ceretti, E. / Giardini, C. / Maccarini, G. | Tema Archiv | 2002
    Schlagwörter: Stanzen

    Development of total stamping simulation system for evaluating formability of sheet metal forming parts

    Moriya, Takeshi / Takamura, Masato / Takahashi, Susumu et al. | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Increased press capacity opens door to assembly work

    Tema Archiv | 2001
    Schlagwörter: Stanzen

    Current trends of hydroforming process into automotive body structure and chassis applications

    Koganti, Ramakrishna / Balzer, Jason / Hertell, Klaus | Tema Archiv | 2008
    Schlagwörter: Stanzen

    Springback control in stamping car body parts

    Maddis, M. De / Basuc, D. / Lombardi, F. | Tema Archiv | 2004
    Schlagwörter: Stanzen

    Development of automotive lightweighting technology in Baosteel

    Wang, Li / Lu, Jiangxin | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Crashworthiness assessment of front side members in an auto-body considering the fabrication histories

    Huh, H. / Kim, K.P. / Kim, S.H. et al. | Tema Archiv | 2003
    Schlagwörter: Stanzen

    Identifying variation in sheet metal stamping

    Doolan, M.C. / Kalyanasundaram, S. / Hodgson, P. et al. | Tema Archiv | 1999
    Schlagwörter: Stanzen

    PMIS Informationssoftware

    Davis, C.D. | Tema Archiv | 1987
    Schlagwörter: STANZEN

    Influence of discontinuous yielding on normal anisotropy (R-value) measurements

    Hance, Brandon M. | Tema Archiv | 2005
    Schlagwörter: Stanzen

    Material parameters in a simulation of metal sheet stamping

    Gauchia, A. / Alvarez-Caldas, C. / Quesada, A. et al. | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Aluminium performs in leisure products

    Sheehan, M. | Tema Archiv | 1982
    Schlagwörter: STANZEN

    Using solid/surface models in CMM programming and analysis

    Jennings, R.M. / Melvin, W. | Tema Archiv | 1990
    Schlagwörter: Stanzen

    Automotive door design using structural optimization and design of experiments

    Lee, Kwon-Hee / Shin, Jung-Kyu / Song, Se-Il et al. | Tema Archiv | 2003
    Schlagwörter: Stanzen

    Manufacturing a roof frame from ultrahigh-strength steel materials by hot stamping

    Schießl, Gerhard / Possehn, Thomas / Heller, Thomas et al. | Tema Archiv | 2004
    Schlagwörter: Stanzen

    Substituting tube-hydroformed parts for automotive stampings: An economic model

    Constantine, B. / Roth, R. / Clark, J.P. | Tema Archiv | 2001
    Schlagwörter: Stanzen

    Stamping and painting of reinforced nylon sheets

    Steinberg, A. / Soliman, F. / Degginger, E. | Tema Archiv | 1974
    Schlagwörter: STANZEN

    Die Design goes full bore into another dimension

    Proeber, Raymond J. | Tema Archiv | 2005
    Schlagwörter: Stanzen

    1.4310 (C1000) stainless steel characterizations

    Toscan, Francois / Bellut, Xavier / Lafounadri, Moulay et al. | Tema Archiv | 2011
    Schlagwörter: Stanzen

    Innovative press hardened steel (Usibor 1500P and Ductibor 500P) based laser welded blanks solutions for improved weight savings and crash safety management

    Pic, Aurelien / Munera, Daniel Duque / Schmit, Francis et al. | Tema Archiv | 2008
    Schlagwörter: Stanzen

    Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method

    Tang, Weiqin / Zhang, Shaorui / Peng, Yinghong et al. | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Optimization of tool/workpiece orientation in designing die-face of automobile outer panels

    Park, J.C. / Lee, K. / Cho, K.H. | Tema Archiv | 1995
    Schlagwörter: Stanzen

    The analysis of production technology and material properties of chassis part from high strength steel

    Bilik, Jozef / Tittel, Viktor / Babicova, Ludmila | Tema Archiv | 2009
    Schlagwörter: Stanzen

    Influence of initial thickness deviation in tube periphery on tube deformation during free hydraulic bulging

    Shirayori, A. / Fuchizawa, S. / Narazaki, M. | Tema Archiv | 2002
    Schlagwörter: Stanzen

    British Steel produces tailored steel sheets for car panels

    Tema Archiv | 1993
    Schlagwörter: Stanzen

    Teaming lasers and robots

    Vaccari, J.A. | Tema Archiv | 1987
    Schlagwörter: STANZEN

    Strategies to optimize the part transport in crossbar transfer presses

    Hoffmann, H. / Kohnhäuser, M. | Tema Archiv | 2002
    Schlagwörter: Stanzen

    Damage evolution in sheet metal forming

    Tirosh, J. / Harvey, D. | Tema Archiv | 1994
    Schlagwörter: Stanzen

    Press-hardened steels in automotive applications - changes and challenges

    Lachmann, Carsten / Eisenberg, Stephan / Paar, Uwe | Tema Archiv | 2008
    Schlagwörter: Stanzen