A digital electrohydraulic control system for emergency braking is designed, simulated, built, and tested. First, a dynamic model of the system was developed with Matlab Simulink. The parameters are obtained experimentally. Feedback gains are obtained by tuning the model. Then, the digital controller is implemented on an industrial personal computer programmed in Turbo C++. The control strategy is an improved digital version of the PID control. The key element in the control of the brake was an electro-hydraulic proportional pressure valve. Experiments show that the control system successfully realizes constant-deceleration emergency brake within mine safety rules. The same hardware can be reprogrammed for various hoists, different load conditions, and different control objectives. Although the test was conducted on a mine hoist brake, the control system can be applied to most vehicles.
Digital Electrohydraulic Control for Constant-Deceleration Emergency Braking
Sae Technical Papers
International Off-Highway & Powerplant Congress ; 2002
19.03.2002
Aufsatz (Konferenz)
Englisch
Digital electrohydraulic control for constant-deceleration emergency braking
| Kraftfahrwesen | 2002
Method for controlling an electrohydraulic braking system and electrohydraulic braking system
| Europäisches Patentamt | 2016
Vehicle deceleration braking method and vehicle deceleration braking system
| Europäisches Patentamt | 2023
Evaluation of emergency braking deceleration for accident reconstruction
| Tema Archiv | 2007
METHOD FOR CONTROLLING AN ELECTROHYDRAULIC BRAKING SYSTEM AND ELECTROHYDRAULIC BRAKING SYSTEM
Europäisches Patentamt | 2017