In applications ranging from noncontact microsurgery to semiconductor blind hole drilling, precise depth control of laser processing is a major challenge. Even expensive a priori characterization cannot compensate for material heterogeneity and stochasticity inherent to the ablation process. Here we use in situ depth imaging to guide the machining process in real time. W e image along the machining beam axis at high speeds (up to 300 kHz) to provide real-time feedback, even in high aspect ratio holes. The in situ metrology is based on coherent imaging (similar to optical coherence tomography) and is practical for a wide-range of light sources and machining processes (e.g., thermal cutting or ultrafast nonlinear ablation). Coherent imaging has a high dynamic range (>; 60 dB) and strongly rejects incoherent signals allowing weak features to be observed in the presence of intense machining light and plasmas. High axial resolution (~10 μm) requires broadband imaging light but the center wavelength can be chosen appropriate to the application. Infrared light (wavelength: 1320 ± 35 nm) allows simultaneous monitoring of both surface and subsurface interfaces in non-absorbing materials like tissue and semiconductors. By contrast, silicon based detector technology can be used with near infrared imaging light (805 ± 25 nm) enabling high speed acquisition and low cost implementation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Inline coherent imaging of laser micromachining


    Beteiligte:
    Webster, P J L (Autor:in) / Yu, J X Z (Autor:in) / Leung, B Y C (Autor:in) / Wright, L G (Autor:in) / Mortimer, K D (Autor:in) / Fraser, J M (Autor:in)


    Erscheinungsdatum :

    01.10.2010


    Format / Umfang :

    496085 byte




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Laser micromachining

    Online Contents | 1995


    Laser Micromachining

    Von Alvensleben, F. / Gonschior, M. / Kappel, H. et al. | British Library Online Contents | 1995


    Excimer Laser Micromachining/Marking

    Andrellos, Jack C. / Scaggs, Michael J. / Sowada, Ulrich | SAE Technical Papers | 1989


    Femtosecond laser micromachining of sapphire

    Kim, K.-S. / Jones, D. / Bente, E. et al. | IEEE | 2001


    ThM3 Femtosecond Laser Micromachining of Sapphire

    IEEE | British Library Conference Proceedings | 2001