An InP/InGaAs double heterojunction bipolar transistor (DHBT) with an undoped emitter tunneling barrier and composite collector structure is fabricated and studied. Due to the mass filtering effect for holes, a thin InP tunneling barrier can be used to replace the wide-gap emitter. Experimentally, an appropriate tunneling barrier thickness of 150 /spl Aring/ is employed to achieve good I-V characteristics. In addition, InGaAsP compositionally step-graded layers are introduced between the p/sup +/-InGaAs base and n/sup -/-InP collector. By modulating the bandgap energy of InGaAsP, the large base-collector (B-C) potential spike can be divided into several small spikes with lower barrier height. The 4000 /spl Aring/ InP collectors with InP/InGaAsP/InGaAs step-graded junction achieve high breakdown voltages of 14.6 V. A small offset voltage of 80 mV and a small saturation voltage of 1.8 V at the collector current level of 5 mA are obtained. Prior to the current gain fall-off caused by the self-heating effect, the step-graded DHBT has the current gain as high as 118 H at I/sub C/ = 30 mA and V/sub CE/ = 3V.
On the InP/InGaAs double heterojunction bipolar transistor (DHBT) with emitter tunneling barrier and composite collector structure
2002-01-01
184403 byte
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
British Library Conference Proceedings | 2002
|A new InGaP/AlGaAs/GaAs Composite-Emitter Heterojunction Bipolar Transistors
British Library Conference Proceedings | 2002
|Der ESBT - Emitter Switched Bipolar Transistor
British Library Online Contents | 2010