Inspired by buckle-induced structural deformation, a new type of tensegrity robot using bending bars is proposed. First, a combination of numerical calculation and the finite-element simulation method was adopted to determine the influence of geometric parameters on equivalent stiffness, and the basic configuration parameters were determined. Then, the tensegrity dynamical model and the ground contact model were established using a nonlinear finite-element method, and four rolling gaits of the robot were realized by driving diagonal cables. Finally, an experimental prototype of the bending bar tensegrity robot was built for rolling gait experiments. The results show that the experimental rolling motion is in good agreement with the theoretical model. Through continuous curve path rolling, the minimum turning radius of the robot was determined, and the motion mode of the prismatic tensegrity robot was enriched.

    Tensegrity structure is a self-balancing system composed of compression bars and tension cables, which has aroused numerous scholars’ research interest in civil architecture, mechanical engineering, aerospace, biomedical, and other fields. The results cover model design, form-finding analysis, static equilibrium stability analysis, optimization design, dynamic response analysis, and so on. In fact, when the tensegrity mechanism is applied to a mobile robot, a change in shape can be achieved by shortening some cables with the actuator, so the system’s stiffness contradicts the ability to deform. The focus of this work is to propose a new type of bending bar design that can replace the spring to meet the needs of large deformation and avoid weakening the structure’s overall stiffness. This design realizes the rolling motion mode of the robot and can be applied to the motion mode of other prismatic tensegrity robots.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Motion Analysis of Bending Bar Tensegrity Robot


    Weitere Titelangaben:

    J. Aerosp. Eng.


    Beteiligte:
    Feng, Yaming (Autor:in) / Liu, Heping (Autor:in) / Luo, Ani (Autor:in) / Wang, Chunlei (Autor:in) / Cao, Ziying (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    01.09.2024




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Tensegrity Robot Concepts

    Adrian Agogino | NTRS | 2025


    Kinematic Analysis of a Flexible Tensegrity Robot

    Altuzarra Maestre, Oscar / Díez Sánchez, Mikel / Corral Saiz, Javier et al. | BASE | 2017

    Freier Zugriff

    Multifunctional tensegrity amphibious dual-drive robot

    FENG XIAODONG / ZHAO SHUBIN / WANG QI et al. | Europäisches Patentamt | 2024

    Freier Zugriff

    Multi-modal motion robot based on tensegrity structure and control method thereof

    LIU YIXIANG / DAI XIAOLIN / LIU CAILONG et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Dynamic equations of motion for a 3-bar tensegrity based mobile robot

    Mirats-Tur, Josep M. / Hernàndez, Sergi / Graells Rovira, Albert | BASE | 2007

    Freier Zugriff