1–20 of 21 hits
|

    Application of fluoride-containing glass & glass ceramics for architectural & automotive purposes

    Khalilev, V.D. / Krasnov, A.N. / Tagiltseva, N.O. et al. | Tema Archive | 1997
    . All the research was based on the representation, that the glass represents a superposition of structural grouping of combinations in the ...
    Keywords: Automobil , Silicatglas

    Screen printing on flat glass for the automotive industry

    Enberg, J. | Tema Archive | 1997
    the way to very sophisticated in-line operations reaching lengths of a hundred meters to print tens of thousands of automotive glass sheets ...

    High speed grinding of automotive sidelite glass

    Gries, W. | Tema Archive | 1997
    increasing speed up to Vc 100 m/sec, a feed rate of 24 m/sec could be reached on 4 mm glass with a fair edge quality. This means an increase of about ...

    Measuring stresses and optical distortion for QC of automotive glass

    Redner, A.S. / Hoffman, B.R. | Tema Archive | 1997
    done by grazing angle surface polarimetry and edge stresses were measured in transmitted light. The optical distortion in automotive glass due ...
    Keywords: Automobil , vorgespanntes Glas

    Design protection: threat to the EU aftermarket for automotive glass?

    Riehle, G. | Tema Archive | 1997
    design rights, especially on car body parts, lightings and automotive glass. To extend design protection to this kind of spares would give ...

    Measuring automotive glass using a line scanner during bending and tempering

    Lappe, V. | Tema Archive | 1997
    The use of a line scanner for the online measurement of the temperature of automobile glass during bending, toughening and tempering is ...
    Keywords: Automobil , Pressen von Glas

    Improved on-line glass measuring system

    Leikas, E. / Yli-Vakkuri, E. | Tema Archive | 1997
    vision system took place in a three-year research program on digital image processing and were presented in 1985. The requirements, such as real ...
    Keywords: Automobil

    A numerical technique for evaluation of automotive glass shape design and optimization of bending processes

    Matsushita, Y. | Tema Archive | 1997
    'design-in'. For this the glass manufacturer collaborates with the car manufacturer on the overall design of the car. The shape and specifications ...
    Keywords: Pressen von Glas

    Car glazing in the future

    Trier, F. / Hirschberger-Hazin, K. | Tema Archive | 1997
    In this paper the car glazing, requirements in the future and the actual glazing technology is reported. The transmission spectrum of ...
    Keywords: Automobil

    Moisture induced delaminations in automotive windscreens

    DeJackome, G.E. | Tema Archive | 1997
    controlling moisture penetration, such as desiccating sealed packages or chemically sealing the edges, are more costly and result in their own set of ...
    Keywords: Automobil

    The real need of solar control glazing in the automotive sector

    Manfre, G. | Tema Archive | 1997
    depends strongly on several variables, including the size, engine and the climatization mode of the vehicle, might be of the order of 5 % well in ...
    Keywords: Automobil , selektiv reflektierendes Glas

    How to make a good laminated safety glass for windscreens

    Russelt, M. van | Tema Archive | 1997
    ) to the final inspection of windscreens before shipment. Special attention should be paid to the processing conditions and their influence on ...
    Keywords: Glas , gebogenes Glas

    Screen-printing enamels and silverpastes for automotive glasses

    Tünker, G. | Tema Archive | 1997
    used in the screen-printing of enamels and silverpastes for automotive glasses are described. Silverpastes are used for printing of hot-lines ...
    Keywords: Automobil , emailliertes Glas

    Shaping PVB interlayer for automotive windscreens

    Bruegge, W. | Tema Archive | 1997
    attractive to laminators in the automotive glass industry. Originating as a small volume batch process for speciality screens, shaping technology has ...
    Keywords: gebogenes Glas

    Improved testing of the heater grid on rear automobile windows, utilizing a thermal imager

    Brown, C. / Lappe, V. | Tema Archive | 2001
    be detected and recorded for future quality records. A thermal image of the defective grid will aid in the process of repairing the grid ...

    The perspective of the real designing trends to increase the glazing surface on vehicles

    Manfre, G. | Tema Archive | 1997
    a strong challenge to the glass makers. Of course new shaping and laminating technology should improve and reduce the cost of the glazing in ...
    Keywords: Automobil

    Windshield bending technology - new possibilities of gravity bending

    Salenius, T. | Tema Archive | 1997
    Modern windshield design is becoming increasingly complex and the shape of the cross bending has to be carefully controlled in order to ...
    Keywords: Automobil

    Laminated side-lites for cars

    Keir, D.A. | Tema Archive | 1997
    The concept of laminated glass all-round in vehicles is at last within sight of reality as car manufacturers react to consumer demands for ...
    Keywords: Automobil

    Simulation of heat transfer between impinging air jets and windshields during manufacturing

    Bhatia, K. / Koram, K.K. / Henry, V.I. | Tema Archive | 1997
    reported in literature. Due to complex shapes of windshields and other automotive glass parts like backlights and quarter windows, the use of ...
    Keywords: gebogenes Glas

    Advanced adhesives for direct glazing applications

    Hirthammer, M. | Tema Archive | 1997
    New design and construction criteria in the automobile industry request improved adhesive properties for bonding of car windows ...
    Keywords: Automobil , In-Situ-Verglasung