The structural design of ultrathin whitetopping (UTW) requires precise predictions of the loading stresses in the concrete slabs. A plate finite element model (FEM) is not used for structures with UTW because the model is not able to account for the asphalt subbase behaviors and the mechanical interaction between the concrete slab and asphalt subbase. A three-dimensional FEM (3DFEM) was used for the stress calculation of UTW. To take into account the mechanical interaction at the interface between the concrete slab and asphalt subbase as well as the load transfer across the joint, a general interface element was developed and incorporated into 3DFEM. Also, the viscosities of asphalt materials were considered by the viscoelastic formulation in the 3DFEM. A loading test was conducted on a test pavement. Stationary and moving loads were applied to the concrete slabs, and the strains in the slabs and the asphalt subbase were measured. By comparing the strains computed by 3DFEM with the measured strains, it was found that the viscosity of the asphalt subbase and the interface condition significantly affect the stresses in the concrete slab.
Mechanical Behavior of Ultrathin Whitetopping Structure Under Stationary and Moving Loads
Transportation Research Record: Journal of the Transportation Research Board
Transportation Research Record: Journal of the Transportation Research Board ; 1823 , 1 ; 102-110
2003-01-01
Article (Journal)
Electronic Resource
English
Performance Evaluation of Whitetopping and Ultrathin Whitetopping Pavements
Transportation Research Record | 2011
|Repair of Ultrathin Whitetopping Pavements
Transportation Research Record | 2001
|Repair of Ultrathin Whitetopping Pavements
Online Contents | 2001
|Rehabilitation of Ellaville Weigh Station with Ultrathin Whitetopping
Transportation Research Record | 1999
|