Restrikes were performed on piles driven for a North Carolina Department of Transportation highway construction project to verify the required bearing capacity, which was not achieved at the end of initial drive (EOID). Driving records of 98 piles with both initial driving and restrike blow counts and hammer stroke were collected. Six of these piles were driven with a pile-driving analyzer, and Case Pile Wave Analysis Program analysis was performed on the collected pile-driving analyzer data. All piles were steel H-pile piles, and the restrikes were done within 144 h after the EOID. The pile bearing capacities of both EOID and restrike were estimated from the blow counts and hammer stroke using the GRL Engineers Inc. Wave Equation Analysis Program, Version 2005. Soil setup ratios of these piles were computed and statistically analyzed to find a reliable setup ratio that can be applied to the bearing capacity obtained at the EOID of the remaining piles in this project to ensure the required bearing without a restrike. The mean soil setup ratio of all piles in this project was estimated at 1.41. However, no setup ratio can be applied to the EOID bearing capacity of an individual pile with a 98% confidence level. Restrike of every pile is required to ensure this level of confidence. A setup ratio of 1.10 can be applied with a 90% confidence level. The setup ratios vary greatly from pile to pile. Soil setup occurs rapidly after EOID in this project. Soil setup is more significant in loose or soft soils than in dense or stiff soils.
Measured Soil Setup of Steel HP Piles from Windsor Bypass Project in North Carolina
Transportation Research Record
2007-01-01
Article (Journal)
Electronic Resource
English
Environmental Justice Evaluation: Wilmington Bypass, Wilmington, North Carolina
Transportation Research Record | 1998
|Airport Project at Sylva, North Carolina
NTIS | 1973
Part 4 -- Society - Environmental Justice Evaluation: Wilmington Bypass, Wilmington, North Carolina
Online Contents | 1998
|