The objective of this study was to develop superelevation criteria for sharp horizontal curves on steep grades. Field studies were undertaken and vehicle dynamics simulations (point mass, bicycle, and multibody) were performed to investigate combinations of horizontal curve and vertical grade design criteria. The vehicle dynamics simulations used AASHTO design criteria and field-measured data to investigate the safety margins against skidding and rollover for several vehicle types on sharp horizontal curves with steep grades. Research results indicated that for a simple horizontal curve, the maximum rate of super elevation should not exceed 12% on a downgrade. A spiral curve transition is recommended if the maximum superelevation rate is greater than 12%. On upgrades of 4% and greater, the maximum superelevation rate should be limited to 9% for minimum-radius curves under certain conditions. The superelevation attained at the point of curve entry should be checked and compared with a lateral friction margin condition so that the lateral friction margin on curve entry is not less than the margin within the curve. On multilane highways, the “Stay in Lane” sign should be installed in advance of sharp horizontal curves on steep downgrades.
Superelevation Design for Sharp Horizontal Curves on Steep Grades
Transportation Research Record
Transportation Research Record: Journal of the Transportation Research Board ; 2436 , 1 ; 81-91
2014-01-01
Article (Journal)
Electronic Resource
English
Investigation of vehicle motion on sharp horizontal curves combined with steep longitudinal grades
Online Contents | 2016
|Investigation of vehicle motion on sharp horizontal curves combined with steep longitudinal grades
Taylor & Francis Verlag | 2016
|Superelevation of railway curves
Engineering Index Backfile | 1943
|Superelevation of automobile highways on curves
Engineering Index Backfile | 1928
|