Research was conducted to develop, test, and evaluate fixed instrumentation that would be both technically and economically feasible for use in measuring maximum scour depth at bridge piers and abutments. A variety of scour-measuring and scour-monitoring methods were tested in the laboratory and in the field, including sounding rods, driven-rod devices, sonic depth finders (fathometers), and buried devices. Two fixed-instrument systems, a low-cost fathometer, and a magnetic slidingcollar device using a driven-rod approach, showed significant promise during initial testing. The project concentrated on installing and testing these two instrument systems under a wide range of bridge substructure geometry, flow, and geomorphic conditions. Both instrument systems met all of the mandatory and many of the desirable criteria established for this research. Cooperative efforts with state highway agencies proved that both systems can be installed with equipment and technical skills normally available to district-level department of transportation maintenance and inspection personnel. The project also provided installation, operation, and fabrication manuals for the low-cost sonic instrument system and magnetic sliding-collar devices.
Fixed Instrumentation for Monitoring Scour at Bridges
Transportation Research Record
1998-01-01
Article (Journal)
Electronic Resource
English
Fixed Instrumentation for Monitoring Scour at Bridges
Online Contents | 1998
|Scour Detection of Railway Bridges by Microtremor Monitoring
TIBKAT | 2021
|Scour Monitoring Development for Two Bridges in Texas
HENRY – Federal Waterways Engineering and Research Institute (BAW) | 2010
|Vulnerability Assessment of Bridges Exposed to Scour
Transportation Research Record | 2013
|Vulnerability Assessment of Bridges Exposed to Scour
Online Contents | 2013
|