One of the design challenges for future magnetospheric satellite missions is optimizing the mass, size, and power consumption of the instruments to meet the mission requirements. We have developed a digital-type fluxgate (DFG) magnetometer that is anticipated to have significantly less mass and volume than the conventional analog-type. Hitherto, the lack of a space-grade digital-to-analog converter (DAC) with good accuracy has prevented the development of a high-performance DFG. To solve this problem, we developed a high-resolution DAC using parts whose performance was equivalent to existing space-grade parts. The developed DAC consists of a 1-bit second-order sigma-delta modulator and a fourth-order analog low-pass filter. We tested the performance of the DAC experimentally and found that it had better than 17-bits resolution in 80% of the measurement range, and the linearity error was 2−13.3 of the measurement range. We built a DFG flight model (in which this DAC was embedded) for a sounding rocket experiment as an interim step in the development of a future satellite mission. The noise of this DFG was 0.79 nTrms at 0.1–10 Hz, which corresponds to a roughly 17-bit resolution. The results show that the sigma-delta DAC and the DFG had a performance that is consistent with our optimized design, and the noise was as expected from the noise simulation. Finally, we have confirmed that the DFG worked successfully during the flight of the sounding rocket.
A digital-type fluxgate magnetometer using a sigma-delta digital-to-analog converter for a sounding rocket experiment
Measurement Science and Technology ; 25 , 7 ; 075803/1-075803/11
2014
11 Seiten, 12 Quellen
Article (Journal)
English
Concept and first results of a digital fluxgate magnetometer
Tema Archive | 1995
|ATS-6 UCLA Fluxgate Magnetometer
IEEE | 1975
|Improved sigma-delta analog-to-digital converter using time-stretching technique [3795-03]
British Library Conference Proceedings | 1999
|