The objective of this work was to explore the benefits of high-pressure steam reforming of ethanol for the production of hydrogen needed to refuel the high-pressure tanks of fuel cell (polymer electrolyte) vehicles. This paper reports on the potential efficiency benefits and challenges of pressurized reforming and options for dealing with the challenges; it reports the results from experiments in a micro-reactor, followed by a modeling study of the reactor to project the dependence of the hydrogen yields on process parameters. The experiments were conducted in the range of approximately 7 atm - 70 atm, 600 deg C -750 deg C, steam-to-carbon molar ratios of 3 -12, and gas hourly space velocities of 8500 - 83,000 per hour. By placing a hydrogen-transporting palladium-alloy membrane within the catalyst zone, this study quantified the beneficial effect of hydrogen extraction from the reforming zone. The model was used to explore the parameter space to define the reactor and conditions that would be needed to approach the efficiency targets for distributed hydrogen production plants. The results indicate that the tested catalyst was sufficiently active, and the hydrogen yield achieved with the experimental membrane reactor was limited by the low hydrogen flux of the tested membrane. The reactor model predicts that a membrane with at least 20 times higher flux than currently evaluated would be sufficient to generate hydrogen yields to match efficiency targets of 72 %.
An analytical and experimental investigation of high-pressure catalytic steam reforming of ethanol in a hydrogen selective membrane reactor
International Journal of Hydrogen Energy ; 35 , 5 ; 2004-2017
2010
14 Seiten, 15 Bilder, 2 Tabellen, 41 Quellen
Article (Journal)
English
Ethanol , Dampfreformierung , Hochdruckverfahren (Verfahrenstechnik) , Wasserstoffproduktion , Polymerelektrolytmembran-Brennstoffzelle , Ausbeute , Verfahrensparameter , Palladiumlegierung , Katalysatoraktivität , Reaktormodell , Membranleistung , Wirkungsgrad (Verfahren) , analytisches Modell , experimentelle Untersuchung , Fahrzeugantrieb
CO-Free Hydrogen Production by Ethanol Steam Reforming in a Pd-Ag Membrane Reactor
Online Contents | 2008
|Methanol steam-reforming in a catalytic fixed bed reactor
Tema Archive | 1997
|Controllability study of an ethanol steam reforming process for hydrogen production
Online Contents | 2011
|Steam reforming of heptane in a fluidized bed membrane reactor
Online Contents | 2010
|Bio-ethanol steam reforming: Insights on the mechanism for hydrogen production
Online Contents | 2006
|