An experimental study is conducted to characterize the performance of a pulsed-plasmajet (called a 'spark jet' by other researchers) for potential use in supersonic flow control applications. A pulsed-plasma jet is a high-speed synthetic jet that is generated by striking an electrical discharge in a small cavity. The gas in the cavity pressurizes owing to the heating and is allowed to escape through a small orifice. To obtain an estimate of the relative strength of the pulsed-plasmajet, the jet is injected normally into a Mach-3 crossflow and the penetration distance is measured by using schlieren imaging. These measurements show that the jet penetrates 1.5 boundary-layer thicknesses into the crossflow and the jet-to-crossflow momentum flux ratio is estimated to be 0.6. Aseries of experiments was conducted to determine the characteristics of the pulsed-plasma jet issuing into stagnant air at a pressure of 35 torr. These results show that typical jet velocities of about 250 m/s can be induced with discharge energies of about 30 mJ per jet. Furthermore, the maximum pulsing frequency was found to be about 5 kHz, because above this frequency the jet begins to misfire. The misfiring appears to be due to the finite time it takes for the cavity to be recharged with ambient air between discharge pulses. The velocity at the exit of the jet is found to be primarily dependent on the discharge current and independent of other discharge parameters such as cavity volume and orifice diameter. Temperature measurements are made using optical emission spectroscopy and reveal the presence of considerable nonequilibrium between rotational and vibrational modes. The gas heating efficiency was found to be 10% and this parameter is shown to have a direct effect on the plasma jet velocity. These results indicate that the pulsed-plasma jet creates a sufficiently strong flow perturbation that holds great promise as a supersonic flow actuator.
Characterization of a high-frequency pulsed-plasma jet actuator for supersonic flow control
Charakterisierung eines gepulsten Hochfrequenz-Plasmajet-Aktuators für die Überschallströmungskontrolle
AIAA Journal ; 48 , 2 ; 297-305
2010
9 Seiten, 12 Bilder, 36 Quellen
Article (Journal)
English