Continued legislative pressure to reduce automotive exhaust emissions requires an automotive catalyst to operate at its peak efficiency up to 120000 miles. Catalyst life is shortened by the poisoning of active sites by glazing caused by the deposition of phosphorous. The primary source of phosphorous is zinc dialkyldithiophosphate, an antiwear and antioxidant additive in engine oil. Therefore, the reduction of the phosphorous level in engine oils raises concern for increased wear of engine components. In an engine equipped with a direct acting mechanical bucket-type valvetrain, high contrast stress coupled with sliding action at the cam and tappet contact makes it particularly vulnerable to wear. Motored single cam lobe valvetrain experiments were conducted to evaluate the wear protection capability of several 0.05 weight-percent P containing engine oils while the oil is fresh. The wear protection capability of vehicle drain samples was also evaluated to ensure adequate protection up to the point of oil change. It was observed that used oils provided significantly improved wear protection capability coupled with reduced friction. An analysis of the tappet shim surface showed that the composition of lubricant-derived protective films formed with used oils is very different than that formed with fresh oil, which may very well explain improved wear characteristics and reduced friction with used oils.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Valvetrain friction and wear performance with fresh and used low-phosphorous engine oils


    Contributors:
    Gangopadhyay, A.K. (author) / Carter, R.O. (author) / Simko, S. (author) / Gao, H. (author) / Bjornen, K.K. (author) / Black, E.D. (author)

    Published in:

    Tribology Transactions ; 50 , 3 ; 350-360


    Publication date :

    2007


    Size :

    11 Seiten, 17 Bilder, 2 Tabellen, 20 Quellen




    Type of media :

    Article (Journal)


    Type of material :

    Print


    Language :

    English




    Valvetrain Friction - Modeling, Analysis and Measurement of a High Performance Engine Valvetrain System

    Cacciatore, Diego / Calabretta, Michele / Carden, Phil | SAE Technical Papers | 2010


    Valvetrain friction reduced

    Yamaguchi,J. / Mazda Motor,JP | Automotive engineering | 1988


    The effect of oil drain interval on valvetrain friction and wear

    Gangopadhyay,A.K. / Carter,R.O. / Uy,D. et al. | Automotive engineering | 2007


    Integrated Engine Performance and Valvetrain Dynamics Simulation

    Wang, Honglu / Nitu, Bogdan / Sandhu, Jaspal et al. | British Library Conference Proceedings | 2016


    The Effect of Oil Drain Interval on Valvetrain Friction and Wear

    Gangopadhyay, A. K. / Phillips, C. B. / Uy, D. et al. | SAE Technical Papers | 2007