Three years ago, several mooring chains of an off-loading buoy failed after only 8 months of service. These chains were designed according to conventional fatigue assessment using API RP 2SK T-N curves to a fatigue life or 20 years with a factor of safety equal to 3 on life. Of particular interest is that the mooring chain failure underwent significant mooring chain motions that caused interlink rotations. Although traditionally neglected, these interlink rotations, when combined with significant chain tensions can cause bending stresses in the chain links. This recently identified phenomena, Out-of-Plane Bending (OPB), explains the extensive fatigue damage causing the mooring chains of the off-loading buoy to fail. OPB stresses were measured on four different chain sizes of various grades. In this paper, special focus is placed on obtaining actual fatigue failures of chains from OPB loading. Smaller chain sizes (40 mm) are used to accommodate the load limits of the testing frame. To mimic the actual loading as close as possible, sub size models of actual chainhawses were used in the testing. Two chainhawses were used: 1) the chainhawse has internal curvature where a link rests on the intrados, similar to offloading buoy that failed in eight months, and 2) a straight chainhase, a design that is in use today with demonstrated improved fatigue performance over the curved chainhawse. OPB stresses are measured and reported. Fatigue loading in the OPB mode was applied for several configurations. The two chainhawse exhibit very different stress levels and fatigue performance. An empirical relationship previously reported is compared to the measured OPB stresses with mixed results. Although limited in number, the fatigue tests indicate that overall the chain fatigue performance is at or above the Bl DnV curve. The BS Bl curve is also compared.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Fatigue testing of out-of-plane bending mechanism of chain links


    Additional title:

    Ermüdungsprüfung des Deformationsbiegemechanismus von Schiffschleppketten


    Contributors:


    Publication date :

    2006


    Size :

    10 Seiten, 22 Bilder, 7 Quellen



    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English






    Initial bending fatigue testing of PVC pipe joints

    Cavak, M. / Scavuzzo, R.J. / Cakmak, M. et al. | Tema Archive | 1998



    Testing Aerospace Gears for Bending Fatigue, Pitting, and Scuffing

    T. Krantz / C. Anderson / I. Shareef et al. | NTIS | 2017