An approach to study the contact analysis of drum brake squeal noise is presented based on three-dimensional Finite Element analysis using Ansys Program. The effect of friction material compressibility, coefficient of friction, and line pressure on the interface contact is examined. The modal analysis of the vehicle drum brake is also studied to get the natural frequency and instability of the drum. It is shown that the Unsymmetric modal analysis is efficient enough to solve this linear problem after transforming the non-linear behaviour of the contact between the drum and the friction material to a linear behaviour. A linear element which is Matrix27, used in the modal analysis is transferred to non-linear elements which are Targe170 and Conta173 to study the contact analysis. The contact problems are highly non-linear and require significant computer resources to solve it, however, the contact problem give two significant difficulties. Firstly, the region of contact is not known based on the boundary conditions, line pressure, and drum and friction material specifications. Secondly, these contact problems need to take the friction into consideration. The modes of the coupled drum brake system contain complex numbers, which have real and imaginary parts. The contact stiffness affects the squeal of the coupled drum brake system. Low or high stiffness could lead to convergence difficulties. Distribution of the nodal reaction force depends mainly on piston load and also affects the wear that happen either in the center or on the edges of the linings. More adequate stiffness leads to less squeal probability. Compressibility of the pad back-plat could affect the distribution of the load on the contact nodes.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Studying the contact analysis behavior of vehicle drum brake using finite element methods


    Additional title:

    Untersuchung des kontaktanalytischen Verhaltens von Fahrzeugtrommelbremsen mit der Finite-Elemente-Methode


    Contributors:


    Publication date :

    2006


    Size :

    10 Seiten, 15 Bilder, 2 Tabellen, 17 Quellen




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English





    2006-01-3561 Studying the Contact Analysis Behavior of Vehicle Drum Brake Using Finite Element Methods

    Ahmed, I. / Society of Automotive Engineers | British Library Conference Proceedings | 2006



    Contact behaviour of vehicle drum brake by using finite element analysis

    Ahmed,I. / Helwan Univ.,EG | Automotive engineering | 2007


    Predicting Drum Brake Noise Using Finite Element Methods

    Somnay, Rajesh / Shih, Shan | SAE Technical Papers | 2002