Powdered steel reinforced by NbC dispersed particles was sintered both in resistive furnace at 1180 C deg or in plasma reactor at 850 C deg (reference temperature) using heating rates that ranged from 10 to 100C deg/min. Fe3P was used as liquid phase sintering additive. The microstructure of the resulting materials was visualized by scanning electronic microscopy. Distinctive microstructural features were observed as a function of the heating source and heating rate. Plasma sintering at rates ~30C deg/min revealed different microstructural features comparing edge and sample bulk. Homogeneous mixtures of Fe and NbC could be sintered in resistive furnace and plasma reactor using relatively low heating rates. Plasma sintering at 800 C deg for 1 h (heating rate of 10C deg/min) resulted in relative densities of ~ 91% of the theoretical density of the composite. Sintering in resistive furnace for 1150 C deg resulted in relative densities ~94%.
Sintering behavior of NbC-reinforced steel
2005
6 Seiten, 5 Bilder, 10 Quellen
Conference paper
English
Flexural and shear behavior of steel fiber reinforced SCC beams
Online Contents | 2013
|Behavior and Performance of Fiber-Reinforced Polymer-to-Steel Bond
Transportation Research Record | 2012
|Flexural and shear behavior of steel fiber reinforced SCC beams
Springer Verlag | 2013
|Flexural Behavior of Layered PVA Fiber/Steel Fiber Reinforced Cementitious Composite Plates
Springer Verlag | 2022
|