An orthotropic deck plate consists of a thin steel plate, stiffened by a series of closely spaced longitudinal stiffeners and transverse crossbeams. Although in use for over 50 years now, this deck type is still the preferred alternative for medium to long span bridges, especially due its low self-weight. In fact 7 out of 10 world's longest bridges are equipped with an orthotropic deck. Unfortunately, it is prone to the phenomenon of fatigue, particularly in the vicinity of the many welded connections. Seen the lack of relevant literature and the importance in the fatigue verification of accurate design stress spectra, it was agreed that more field research was necessary. As part of a research programme, a series of measurements were carried out on different bridges with orthotropic plated deck, subject to both road and railway traffic. This paper describes the test procedure, the challenges and the advantages of the method used and analyses the results in view of the fatigue problem. It especially focuses on the differences found for equal geometries but different loads. The recordings have demonstrated a significant difference between road and railway traffic for the locations and have proven that, from a fatigue point of view, high-speed train traffic is not severe, compared to freight train traffic. The cope hole in the crossbeam web around the outer longitudinal stiffeners proves to be determining in the fatigue verification for railroad bridges due to a combination of rectangular framework action and local load introduction at this location. In addition the stress pattern is highly non-linear in the vicinity of the cope-hole edge, raising the stress values up to 40% within a few millimetres adjacent to the edge. Furthermore, for ballasted railway tracks, the longitudinal stiffener to deckplate joint is free from any fatigue problem due to the load dispersal, whereas this is the most stressed location for road bridges. This type of results can only be achieved through continuous high frequency strain gauge measurements.


    Access

    Access via TIB

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Fatigue assessment of orthotropic bridge decks through high frequency strain gauge measurements


    Additional title:

    Ermüdungsbewertung orthotroper Brückenfahrbahntafeln mittels Hochfrequenz-Dehnungsmessstreifen


    Contributors:


    Publication date :

    2004


    Size :

    4 Seiten, 6 Bilder, 2 Tabellen



    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    Wearing Surfaces for Orthotropic Steel Bridge Decks

    Hulsey, J. Leroy / Yang, Liao / Raad, Lutfi | Transportation Research Record | 1999


    Assessment of fatigue strength of steel orthotropic plated bridge decks from continuous measured stress spectra

    De Corte, W. / Van Bogaert, P. / Belgian Group of IABSE et al. | British Library Conference Proceedings | 2003


    Analysis of Isotropic and Orthotropic Sandwich Bridge Decks

    Agarwal, Preeti / Pal, P. / Mehta, P. K. | Springer Verlag | 2020