The Space Launch System (SLS) and its Mobile Launcher (ML) will be transported to the launch pad via the Crawler-Transporter (CT) system. Rollout (i.e., transportation) loads produce structural loads on the integrated SLS/Orion Multi-Purpose Crew Vehicle (MPCV) launch vehicle which are of a concern with respect to fatigue. As part of the risk reduction process and in addition to the modal building block test approach that has been adopted by the SLS Program, acceleration data will be obtained during rollout for use in modal parameter estimation. There are several occurrences where the ML/CT will be transported either into the Vertical Assembly Building (VAB) or to the launch pad and back without the SLS stack as part of the Kennedy Space Center (KSC) Exploration Ground Systems (EGS) Integrated Test and Checkout (ITCO). NASA KSC EGS has instrumentation installed on both the ML and CT to record data during rollout, at the launch pad, and during liftoff. The EGS instrumentation on the ML, which includes accelerometers, is referred to as the Sensor Data Acquisition System (SDAS). The EGS instrumentation on the CT, which also includes accelerometers, is referred to as the CT Data Acquisition System (CTDAS). The forces and accelerations applied to the ML and CT during a rollout event will be higher than any of the planned building block modal tests. This can be very beneficial in helping identify nonlinear behavior in the structure. Developing modal parameters from the same test hardware in multiple boundary conditions and under multiple levels of excitation is a key step in developing a well correlated FEM.
The purpose of this study was three fold. First, determine the target modes of the ML/CT in its rollout configuration. Second, determine if the test degrees of freedom (DOF) corresponding to the layout of the SDAS/CTDAS accelerometers (i.e. position and orientation) is sufficient to identify the target modes. Third, determine if the Generic Rollout Forcing Functions (GRFF’s) (“Development of Generic Crawler/Transporter Rollout Forcing Functions for Coupled System Dynamics Analysis,” NASA Exploration Systems Directorate/Cross-Program Systems Integration Technical Assessment Report, ESD 20038, July 31, 2018) is sufficient for identifying the ML/CT target modes accounting for variations in CT speed, modal damping, and sensor/ambient background noise levels.
The finding from the first part of this study identified 28 target modes of the ML/CT rollout configuration based upon Modal Effective Mass Fractions (MEFF) and engineering judgement. The finding from the second part of this study showed that the SDAS/CTDAS accelerometers (i.e. position and orientation) are able to identify a sufficient number of the target modes to support model correlation of the ML/CT FEM. The finding from the third part of this study confirms the GRFFs sufficiently excite the ML/CT such that varying quantities of the defined target modes should be able to be extracted when utilizing an Experimental Modal Analysis (EMA) Multi-Input Multi-Output (MIMO) analysis approach. An EMA analysis approach was used because Operational Modal Analysis (OMA) tools were not available and the GRFFs were sufficiently uncorrelated. Two key findings from this third part of the study are that the CT speed does not show a significant impact on the ability to extract the modal parameters and that keeping the ambient background noise observed at each accelerometer location at or below 30 μgrms is essential to the success of this approach.
Even though this study relies heavily upon the accuracy of both uncorrelated ML and CT FEM’s and unconfirmed rollout forcing functions, all of which will most likely differ from actuality, it provides important insights into the ability to extract modal parameters from the upcoming rollout events.
Feasibility Study of SDAS Instrumentation’s Ability to Identify Mobile Launcher (ML)/Crawler-Transporter (CT) Modes During Rollout Operations
Conf.Proceedings of Society
Sensors and Instrumentation, Aircraft/Aerospace, Energy Harvesting & Dynamic Environments Testing, Volume 7 ; Chapter : 12 ; 101-121
2020-09-30
21 pages
Article/Chapter (Book)
Electronic Resource
English
Crawler transporter , Launch vehicle , Mobile launcher , Space launch system , Finite element model , Modal damping , Modal parameters , Sensor noise , Target modes , Time-domain force response analysis , Forcing functions , Accelerometers , Rollout , NASA Engineering , Aerospace Technology and Astronautics , Energy Harvesting , Vibration, Dynamical Systems, Control , Measurement Science and Instrumentation