Surface integrity is the surface condition of a workpiece after being modified by a manufacturing process and it can change the material’s properties. In surface topography, surface roughness (Ra) was concerned with the geometry of the outmost layer of the workpiece texture and interfaces exposed with the environment affects several functional attributes of parts, such as friction, wear and tear, heat transmission, ability of distributing and holding a lubricant, etc. Therefore, the desired surface finish was usually specified and appropriate processes were required to assess and maintain the quality of a component. The research was to investigate the influence of machining parameters and optimum process parameter to the surface roughness value of mild steel material in conventional turning using CVD (chemical vapor deposition) coated carbide insert in three cutting conditions (dry, wet and oil). Optimization of the cutting parameters is very important in determining the optimum cutting conditions, thus reduce machining cost and time consumed. From the results obtained, better surface roughness value was determined by a combination of cutting speed 150 m/min, and feed rate 0.1 mm/rev with under coolant oil condition.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Surface Roughness Study on Mild Steel Under Multi Cooling Condition


    Additional title:

    Lect.Notes Mechanical Engineering




    Publication date :

    2020-08-06


    Size :

    9 pages





    Type of media :

    Article/Chapter (Book)


    Type of material :

    Electronic Resource


    Language :

    English




    Surface Roughness Study on Mild Steel Under Multi Cooling Condition

    Sulaiman, M. A. / Halimnizam, A. A. / Asiyah, M. S. et al. | TIBKAT | 2021


    Shuttle Boundary-Layer Transition Due to Distributed Roughness and Surface Cooling

    John J. Berlin / Timothy E. Hayden / Winston D. Goodrich | AIAA | 1982


    Dependence of Film Cooling Effectiveness on In-Hole and Surface Roughness

    Ikwubuo, Melvin / Caraballo, Edgar J. / Munday, David E. | AIAA | 2018


    Experimental Study of Surface Roughness Noise

    Liu, Yu / Dowling, Ann / Shin, Ho-Chul et al. | AIAA | 2007


    Effect of surface cooling and roughness on transition for the Shuttle Orbiter

    BERTIN, J. / IDAR, III, E. / GOODRICH, W. | AIAA | 1977