During the course of emissions and fuel economy (FE) testing, vehicles that are calibrated to meet Tier 3 emissions requirements currently must demonstrate compliance on Tier 3 E10 fuel while maintaining emissions capability with Tier 2 E0 fuel used for FE label determination. Tier 3 emissions regulations prescribe lower sulfur E10 gasoline blends for the U.S. market. Tier 3 emissions test fuels specified by EPA are required to contain 9.54 volume % ethanol and 8-11 ppm sulfur content. EPA Tier 2 E0 test fuel has no ethanol and has nominal 30 ppm sulfur content. Under Tier 3 rules, Tier 2 E0 test fuel is still used to determine FE. Tier 3 calibrations can have difficulty meeting low Tier 3 emissions targets while testing with Tier 2 E0 fuel. Research has revealed that the primary cause of the high emissions is deactivation of the aftertreatment system due to sulfur accumulation on the catalysts. The emissions drive cycles used in the test sequence play a significant role in catalyst deactivation. It is possible to desulfur the catalyst by employing an aggressive drive cycle to sustain catalyst temperatures above 650°C (1202°F). Drive cycles that produce the higher sustained catalyst temperatures are not found in the miles per gallon (MPG) method FE test sequence. Therefore, the aftertreatment system and calibration must be robust to sulfur accumulation during less aggressive drive cycles. A number of control tuning strategies were tested, and their robustness to sulfur accumulation on the catalysts was determined.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Tier 2 Test Fuel Impact to Tier 3 Aftertreatment Systems and Calibration Countermeasures


    Additional title:

    Sae Int. J. Fuels Lubr
    Sae International Journal of Fuels and Lubricants


    Contributors:

    Conference:

    WCX World Congress Experience ; 2018



    Publication date :

    2018-04-03


    Size :

    10 pages




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    Tier 2 Test Fuel Impact to Tier 3 Aftertreatment Systems and Calibration Countermeasures

    White, Eugene D. / Anderson, Bruce / Ranspach, Paul | British Library Conference Proceedings | 2018


    Assessment of Tier 4 Final Aftertreatment Strategies

    Ohrnberger, T. / Becker, C. / Doehring, C. et al. | British Library Conference Proceedings | 2012


    Assessment of Tier 4 Final Aftertreatment Strategies

    Becker, Carsten / Doehring, Christoph / Ohrnberger, Tobias | SAE Technical Papers | 2012


    Technologies for Tier 4 - integrated engine and aftertreatment concepts

    Wiartalla,A. / Maassen,F. / Neitz,M. et al. | Automotive engineering | 2012


    Development of Diesel Exhaust Aftertreatment System for Tier II Emissions

    Cole, A. S. / Stroia, B. J. / Howden, Ken et al. | SAE Technical Papers | 2002