The primary objective of this paper is to compare different methods of knock detection based on cylinder pressure data, with special regard to identifying knocking cycles and detecting the onset of knock. These investigations have resulted in the development of a new knock detection method based on high-pass filtered heat release. Different signal characteristics have been considered. The model has been developed on the basis of experimental data for a four-valve production engine, and verified over a wide range of operating conditions. For the purpose of thermodynamic investigations, the new knock detection algorithm allows the determination of the engine operating points that correspond to the knock limit, and their mean crank angle of knock onset.The thermodynamic properties of the end gas at knock onset have been discussed using a zero-dimensional two-zone model. Existing empirical autoignition delay correlations implemented in the heat release model and derived by matching an Arrhenius function to recorded data on autoignition times, have been applied and compared to a modified autoignition model based on the “Franzke Knock Criterion” [1]. The prediction of knocking operation has been compared with measured data.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Application of Different Cylinder Pressure Based Knock Detection Methods in Spark Ignition Engines


    Additional title:

    Sae Technical Papers


    Contributors:
    Schwarz, F. (author) / Worret, R. (author) / Bernhardt, S. (author) / Spicher, U. (author)

    Conference:

    Spring Fuels & Lubricants Meeting & Exhibition ; 2002



    Publication date :

    2002-05-06




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English


    Keywords :


    Application of different cylinder pressure based knock detection methods in spark ignition engines

    Worret,R. / Bernhardt,S. / Schwarz,F. et al. | Automotive engineering | 2002


    Knock detection for spark ignition engines

    Ghisio,G. / Maloberti,F. / Polito,G. et al. | Automotive engineering | 1990


    Knock in Spark Ignition Engines

    By,A. / Kempinski,B. / Rife,J.M. et al. | Automotive engineering | 1981


    Knock in Spark Ignition Engines

    By, A. / Kempinski, B. / Rife, J. M. | SAE Technical Papers | 1981


    Cylinder-pressure-based methods for sensing spark-ignition engine knock

    Borg,J.M. / Alkidas,A.C. / Hitachi America,US et al. | Automotive engineering | 2007