In order to comply with more and more stringent emission standards, like EU6 which will be mandatory starting in September 2014, GDI engines have to be further optimized particularly in regard of PN emissions. It is generally accepted that the deposition of liquid fuel wall films in the combustion chamber is a significant source of particulate formation in GDI engines. Particularly the wall surface temperature and the temperature drop due to the interaction with liquid fuel spray were identified as important parameters influencing the spray-wall interaction [1].In order to quantify this temperature drop at combustion chamber surfaces, surface temperature measurements on the piston of a single-cylinder engine were conducted. Therefore, eight fast-response thermocouples were embedded 0.3 μm beneath the piston surface and the signals were transmitted from the moving piston to the data acquisition system via telemetry.Extensive parameter variations were performed, in order to investigate the influence of e.g. the rail pressure, the engine load and the engine speed on the surface temperature of the piston. In particular the very slow increase of the piston surface temperature in comparison to the fast increase of the engine load could be determined as the main cause of the rise in particulate emissions during dynamic engine operation.The shown studies can be used as a database from which, important measures to reduce particulate emissions can be derived. Additionally, the numerical simulation can be improved significantly based on the extensive measurement data, representing another important step towards the prediction of particulate emissions by numerical simulation.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Experimental Investigation of Fuel Impingement and Spray-Cooling on the Piston of a GDI Engine via Instantaneous Surface Temperature Measurements


    Additional title:

    Sae Int. J. Engines



    Conference:

    SAE 2014 World Congress & Exhibition ; 2014


    Published in:

    Publication date :

    2014-04-01


    Size :

    17 pages




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English






    Laser-Based Measurements of Surface Cooling Following Fuel Spray Impingement

    Mendieta, Aldo / Schuenemann, Erik / Schulz, Florian et al. | SAE Technical Papers | 2018


    Impingement identification in a high speed diesel engine using piston surface temperature measurements

    Miers,S.A. / Anderson,C.L. / Blough,J.B. et al. | Automotive engineering | 2005


    Impingement Identification in a High Speed Diesel Engine Using Piston Surface Temperature Measurements

    Anderson, Carl L. / Blough, Jason R. / Inal, M. Koray et al. | SAE Technical Papers | 2005