A Cu/ZSM-5 catalyst has been tested in both the laboratory and in a gasoline-fueled, lean-burn car. This catalyst is generally believed to be the current “state of the art” for removing NOx from lean engine exhaust. The laboratory tests showed that the HC species was the exhaust component which reduced the NOx. This catalyst actually produced CO, but the CO had no impact on the NOx reduction. The NOx conversion was inhibited by oxygen at oxygen levels below 4%, but was also modestly inhibited by oxygen levels above 4%. The NOx, conversion of these catalysts was less affected by SO2 than were the HC and CO conversions. These catalysts showed very poor thermal durability, losing much of their activity after aging under conditions milder than those typically used for three-way catalysts.The vehicle tests of the fresh Cu/ZSM-5 catalyst showed between 30 and 40% average NOx conversion. Hence, the car on which this catalyst was tested would have to have engine-out NOx emissions of less than 0.65 g/mi in order to meet a 0.4 g NOx/mi tailpipe standard, the most lenient of the 1996 Federal emission standards. Since this catalyst had very poor HC performance, it is likely that it would be difficult to meet the future HC standards if this catalyst were used alone. The durability of the lean NOx catalyst must also be improved.
Evaluation of a Cu/Zeolite Catalyst to Remove NOXfrom Lean Exhaust
Sae Technical Papers
International Congress & Exposition ; 1993
1993-03-01
Conference paper
English
Evaluation of a Cu/Zeolite catalyst to remove NOx from lean exhaust
Automotive engineering | 1993
|Extruded Zeolite Catalysts for Lean Exhaust Application
SAE Technical Papers | 2005
|Extruded Zeolite catalysts for lean exhaust application
Automotive engineering | 2005
|2005-01-1118 Extruded Zeolite Catalysts for Lean Exhaust Application
British Library Conference Proceedings | 2005
|Ventilating garages to remove exhaust fumes
Engineering Index Backfile | 1928