Due to the rising costs of fuel and increasingly stringent regulations, auto makers are in need of technology to enable more fuel-efficient powertrain technologies to be introduced to the marketplace. Such powertrains must not sacrifice performance, safety or driver comfort. Today's engine and powertrain manufacturers must, therefore, do more with less by achieving acceptable vehicle performance while reducing fuel consumption. One effective method to achieve this is the extreme downsizing of current direct injection spark ignited (DISI) engines through the use of high levels of boosting and cooled exhaust gas recirculation (EGR). Key challenges to highly downsized gasoline engines are retarded combustion to prevent engine knocking and the necessity to operate at air/fuel ratios that are significantly richer than the stoichiometric ratio. As a result of changes to the combustion process, cooled EGR offers the potential benefit of engine knock reduction and the elimination of overfuelling. This allows higher compression ratios and the production of more torque at low engine speeds, which in turn enables downsized fuel-efficient engines to become more accepted in the market place. Low pressure EGR was chosen for this research project due to the advantages of being able to drive EGR over a large area of the engine speed and load map, due to the differential pressure between the turbine and compressor. In this paper the fuel economy savings on SI engines as a direct result of adding low pressure cooled EGR to the combustion process are considered. Laboratory tests were run in order to compare engine efficiency and performance with and without cooled EGR. A 3.2 liter V6 spark ignited engine was used for the testing; both E0 (gasoline) and E85 fuels were studied. The testing was conducted across the entire range of engine speeds and loads. The laboratory tests have shown that cooled EGR is a key technology for enabling downsized engines and provide a means to meet the market requirement of “doing more with less”.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    “Doing More with Less” - The Fuel Economy Benefits of Cooled EGR on a Direct Injected Spark Ignited Boosted Engine


    Additional title:

    Sae Technical Papers


    Contributors:

    Conference:

    SAE 2010 World Congress & Exhibition ; 2010



    Publication date :

    2010-04-12




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English





    Soot Formation in a Multipoint-Fuel-Injected Spark-Ignited Engine

    Kosowski, Mark G. | SAE Technical Papers | 1985


    Soot formation in a multipoint-fuel-injected spark-ignited engine

    Kososwski,M.G. / General Motors,Advanced Products and Manufacturing Engng.,US | Automotive engineering | 1985


    Literature Survey of Water Injection Benefits on Boosted Spark Ignited Engines

    Rohit, Achint / Surnilla, Gopichandra / Choi, Jeongyong et al. | SAE Technical Papers | 2017


    Ion Sensing for Combustion Stability Control of a Spark Ignited Direct Injected Engine

    Andersson, Ingemar / Eriksson, Lars | SAE Technical Papers | 2000