Diesel particulate filter (DPF) systems are being used to reduce the particulate matter emissions of diesel vehicles. The DPF should be regenerated after certain driving hours or distance to eliminate soot in the filter. The most widely used method is active regeneration with oxygen at 550~650°C. Fuel penalty occurs when the exhaust gas temperature is increased. The low temperature oxidation technique is needed to reduce fuel consumption.In this study, we found that hydrogen could be used to decrease the PM oxidation temperature significantly on a catalyzed DPF (CDPF). The oxidation characteristics of PM with hydrogen supplied to CDPF were studied using a partial flow system. The partial flow system was used to control temperature and a flow rate independently. The CDPF was coated with Pt/Al₂O₃ 25g/ft₃, and a multi-channel CDPF (MC CDPF) with a square cross section of 1.65 cm width and length of 10 cm was used.Firstly, a hydrogen oxidation was tested for DPFs with and without a catalyst. The oxygen concentration was fixed at 10%, and hydrogen concentration was changed from 2% to 8%. For the DPF without a catalyst, there was no significant hydrogen oxidation below 300°C. However for the CDPF, the hydrogen oxidation started actively over 120°C.Secondly, soot regeneration experiments were performed to investigate hydrogen exothermic reaction effects on soot oxidation in a CDPF. Prior to perform oxidation experiments, PM was collected about 8 g/L at the CDPF with a engine speed of 1500 rpm and BMEP of 8 bar. Also, partial flow temperature of 200°C was used to minimize the NO₂ passive regeneration effect. The test was carried out with a wide range of temperatures and hydrogen concentrations. Soot oxidation in the CDPF started when H₂ concentration was 3% and the temperature was as low as 180°C. Regeneration became faster when H₂ concentration was higher.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Low Temperature Active Regeneration of Soot Using Hydrogen in a Multi-Channel Catalyzed DPF


    Additional title:

    Sae Technical Papers


    Contributors:

    Conference:

    SAE 2010 World Congress & Exhibition ; 2010



    Publication date :

    2010-04-12




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English





    A soot filter regeneration system

    Kugland,P. / Ullmer,A. / Zilmans,R. et al. | Automotive engineering | 1990



    Performance of a Catalyzed Diesel Particulate Filter System During Soot Accumulation and Regeneration

    Guo, Gang / Maricq, M. Matti / Xu, Ning et al. | SAE Technical Papers | 2003


    Continuous Soot Regeneration Technologies of a Catalyzed Particulate Filter for Diesel Passenger Car

    Kim, C. D. / Korean Society of Automotive Engineers | British Library Conference Proceedings | 2005