The effect of engine operating parameters (speed, spark timing, and fuel-air equivalence ratio [Φ]) on hydrocarbon (HC) oxidation within the cylinder and exhaust system is examined using propane or isooctane fuel. Quench gas (CO2) is introduced at two locations in the exhaust system (exhaust valve or port exit) to stop the oxidation process. Increasing the speed from 1500 to 2500 RPM at MBT spark timing decreases the total, cylinder-exit HC emissions by ∼50% while oxidation in the exhaust system remains at 40% for both fuels. For propane fuel at 1500 rpm, increasing Φ from 0.9 (fuel lean) to 1.1 (fuel rich) reduces oxidation in the exhaust system from 42% to 26%; at 2500 RPM, exhaust system oxidation decreases from 40% to approximately 0% for Φ = 0.9 and 1.1, respectively. Retarded spark increases oxidation in the cylinder and exhaust system for both fuels. Decreases in total HC emissions are accompanied by increased olefinic content and atmospheric reactivity. The effect of coolant temperature on HC emissions was examined using a gasoline fuel. The decrease in HC emissions with increasing coolant temperature occurs within the engine cylinder while the percentage burn up in the exhaust system remains constant.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Effect of Engine Operating Parameters on Hydrocarbon Oxidation in the Exhaust Port and Runner of a Spark-Ignited Engine


    Additional title:

    Sae Technical Papers



    Conference:

    International Congress & Exposition ; 1995



    Publication date :

    1995-02-01




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English






    Models for Heat Transfer, Mixing and Hydrocarbon Oxidation in a Exhaust Port of a Spark-Ignited Engine

    Caton,J.A. / Heywood,J.B. / Texas A and M Univ.,US et al. | Automotive engineering | 1980



    Exhaust hydrocarbon emissions during the running-in of a spark ignited engine

    Willcock,M. / Tidmarsh,D. / Foss,P. et al. | Automotive engineering | 1991