Engine oil consumption is one of the primary interests for the automotive industry in controlling emissions and reducing service cost. Due to a lack of understanding of the mechanisms and flow patterns of oil transport along the piston, reducing oil consumption from the ring pack of internal combustion engines has been extremely challenging for engine manufacturers and suppliers. In work prior to this study (see Part I [1]), individual oil transport processes such as oil flows on the piston lands in both axial and circumferential directions, oil flows through the ring grooves and gaps and oil flows between the piston and the liner have been identified and characterized. One of the major difficulties remaining for oil transport analysis was the lack of description of how the oil transport mechanisms previously investigated affect, through the multitude of flow paths, the oil balance in the various sub-regions and the net oil flow toward the combustion chamber.In this work, in order to have a comprehensive description of the routes of oil transport through the entire piston ring pack, a unique two-dimensional Laser-Induced Fluorescence (LIF) visualization system was used to examine the oil flow patterns in the upper piston region under a wide range of engine operating conditions. All major flow paths and mechanisms of oil transport along the piston were integrated into a macro oil transport model. It appeared that the rate at which oil is lost to the combustion chamber is mostly determined by the competing oil transport processes occurring on the piston lands. While the inertia force carries oil across the lands and through the ring grooves toward the top of the piston, the dragging action of the blow-by gases removes oil from the piston lands and recycles it to the crankcase. Additionally, dividing the ring pack in three zones, oil transport processes were analyzed region by region, emphasizing the effect of ring designs and engine operating conditions on the control of the oil supply to the most critical areas, namely, the top ring groove and the crown land. Eventually, the region by region analysis showed that there are three main locations where the rate of oil transport to the combustion chamber can be controlled:
Oil Transport in the Piston Ring Pack (Part II): Zone Analysis and Macro Oil Transport Model
Sae Technical Papers
2003 JSAE/SAE International Spring Fuels and Lubricants Meeting ; 2003
2003-05-19
Conference paper
English
British Library Conference Proceedings | 2015
|SAE Technical Papers | 2015
|An experimental study of oil transport between the piston ring pack and cylinder liner
Automotive engineering | 2005
|An Experimental Study of Oil Transport between the Piston Ring Pack and Cylinder Liner
SAE Technical Papers | 2005
|