Experimental Lithium-ion (Li-ion) cells were constructed with three different types of Li-ion cathode materials and two different graphitic anodes. The cathode materials were lithium nickel cobalt aluminum oxide, LiNiXCoYAlZO2 (NCA), lithium nickel cobalt manganese oxide, LiNiXCoYMnZO2 (NCM), and lithium iron phosphate, LiFePO4 (FEP). The two graphitic anodes differed only in particle size. The cells were built in lots identified by their cathode and anode materials. The goal was to develop a battery for Naval Aviation applications. Initial testing favored the cells built with an NCM cathode. Further testing was per MIL-PRF-8565/14(AS) with Amendment 1, which resulted in a reduced voltage range during testing favoring the NCA lots. The cells were tested under two different types of cycle life conditions. In both cases, the NCA lots fared best. The NCA lots also had the lowest DC Resistance (DC Res) results (both ≤10 mΩ). One NCA lot experienced no loss in discharge capacity at -20°C after cycling at 70°C, and little loss (-6.5%) after storage at 85°C. That NCA lot was selected for the developmental battery build.
Development of Lithium-Ion Batteries for Naval Aviation Applications
Sae Int. J. Aerosp
SAE 2012 Power Systems Conference ; 2012
Sae International Journal of Aerospace ; 5 , 2 ; 541-547
2012-10-22
7 pages
Conference paper
English
Development of U.S. Naval Aviation
Engineering Index Backfile | 1919
The Wings of Naval Aviation series: Naval Aviation Observer
Online Contents | 1996
Engineering Index Backfile | 1929
The Wings of Naval Aviation series: Naval Aviation Observer
British Library Online Contents | 1996
Engineering Index Backfile | 1951
|