Multiple-injection strategy for Premixed Charge Compression Ignition (PCCI) combustion was investigated in a four-valve, direct-injection diesel engine by CFD simulation using KIVA-3V code [ 1 ] coupled with detailed chemistry. The effects of fuel splitting proportion, injection timing, included spray angles, injecting velocity, and the combined effects of injection parameters and EGR rate and boost pressure were examined. The mixing process and formations of soot emission and NO x were investigated as the main concern of the research. The results show that the fuel splitting proportion and the injection timing significantly impacted the combustion and emissions due to the considerable changes of the mixing process and fuel distribution in cylinder. The soot emission and unburned HC (UHC) were affected by included spray angles since the massive influences of the fuel distribution resulted from the change in spray targeting point on piston bowl. As a result of improved evaporation, faster combustion and a rise of NO x emission were obtained when injecting velocity increased. Soot emission increased significantly when the velocity at injector increase, which caused worse impinging on piston bowl. High EGR rate was shown as an approach to yield a low NO x and soot solution in the research, while this approach faced the cruel problems of poor efficiency and high CO and UHC. According to the study about the effects of boost pressure, properly raise boost pressure was considered as a method with prospect which can resolve the problems result from high EGR rate.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    An Investigation of Multiple-Injection Strategy in a Diesel PCCI Combustion Engine


    Additional title:

    Sae Technical Papers


    Contributors:
    Liu, Bin (author) / Jia, Ming (author) / Peng, Zhijun (author)

    Conference:

    SAE 2010 World Congress & Exhibition ; 2010



    Publication date :

    2010-04-12




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    An investigation of multiple-injection strategy in a diesel PCCI combustion engine

    Liu,B. / Jia,M. / Peng,Z. et al. | Automotive engineering | 2010


    Optimizing Early Injection Strategy for Diesel PCCI Combustion

    Walter, B. / Mounaim-Rousselle, C. / Foucher, F. et al. | SAE Technical Papers | 2009


    Optimizing early injection strategy for Diesel PCCI combustion

    Andre,M. / Walter,B. / Bruneaux,G. et al. | Automotive engineering | 2009


    Selection of Injection Parameters for Various Engine Speeds in PCCI-Based Diesel Combustion with Multiple Injection

    Tanaka, Hirokazu / Horibe, Naoto / Ishiyama, Takuji | SAE Technical Papers | 2011


    Experimental investigation for PCCI diesel engine control design

    Vanegas Rodriguez, Anyelo Javier | TIBKAT | 2014