Concerns over greenhouse gas emissions are driving governments and the automotive industry to seek out ways of reducing vehicle CO₂ emissions. Engine friction reduction is one means of reducing CO₂ emissions, through fuel consumption improvements. The ancillary drive system typically contributes up to 8% of the total engine friction level, so improvements in this system can make a real difference to engine efficiency, fuel consumption and CO₂ emissions.Mahle has undertaken a series of rig tests, based on a 2.5-liter gasoline engine, but built to a minimum friction level of hardware. Using motored drive torques, the losses associated with different alternator drive concepts was investigated: - Standard 150A alternator, - Reduced capacity 120A alternator, - Reduced capacity 120A alternator driven by a dual speed gearbox, and - Reduced capacity 120A alternator driven by a twin-belt dual ratio pulley.The engine test configuration enabled the friction sensitivity to be considered in respect of oil temperature, belt tension, belt temperature and alternator loading, as well as the hardware changes considered.The twin-belt concept demonstrated a friction improvement capability, whereas changing the effective alternator ratio by means of a dual speed gearbox demonstrated a detriment. The use of a twin-belt system could offer the opportunity to reduce the overall FEAD system losses as well as potentially enabling smaller alternators to be specified. Cost and packaging issues permitting, this could reduce the parasitic losses associated with an alternator drive system.With a twin-belt arrangement, the test engine demonstrated an improvement in net parasitic losses of between 300W and 400W, at an engine speed of 5000 RPM and alternator loading of 60A. For the same test conditions, a dual speed gearbox would need to be operating at an efficiency above approximately 80% to avoid a net worsening in parasitic losses, whilst the measured efficiency of the test unit was approximately 60%.This paper considers the approach to the testing, the test results obtained and some further discussion.
Reduction in Parasitic Losses by Careful Choice of Alternator Drive System
Sae Technical Papers
SAE 2012 World Congress & Exhibition ; 2012
2012-04-16
Conference paper
English
Reduction in Parasitic Losses by Careful Choice of Alternator Drive System
British Library Conference Proceedings | 2012
|Reduction of Parasitic Losses in Front-End-Accessory-Drive Systems - Part 1
SAE Technical Papers | 2017
|Reduction of Parasitic Losses in Front-End Accessory Drive Systems: Part 2
SAE Technical Papers | 2018
|Brayton cycle alternator-drive turbine aerodynamic study
NTRS | 1968
|