Emissions from CI engines fueled with dimethyl ether (DME) were discussed in this paper. Thanks to its high content of fuel oxygen, DME combustion is virtually soot free. This characteristic of DME combustion indicates that the particulate filter will not be needed in the aftertreatment system for engines fueled with DME. NOx emissions from a CI engine fueled with DME can meet the US 2007 regulation with a high EGR rate. Because 49% more fuel mass must be delivered in each DME injection than the corresponding diesel-fuel injection, and the DME injection pressure is lower than 500 bar under the current fuel-system technology, the DME injection duration is generally longer than that of diesel-fuel injection. This is unfavorable to further NOx reduction. A multiple-injection strategy with timing for the primary injection determined by the cylinder temperature was proposed. It is believed that employing the Miller cycle for the low load operations and the multiple injection strategy for high load operations, plus a high EGR rate, NOx emissions from DME engines could possibly meet the US 2010 standard. In the case that the aftertreatment for NOx is needed, the reformed DME - a product of the DME-water partial reaction, may be used as a NOx reductant for the lean NOx trap (LNT). The reformed DME has higher NOx conversion efficiency than hydrocarbon fuels, which reduces the fuel penalty for the LNT regeneration.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Can Heavy-Duty Diesel Engines Fueled with DME Meet US 2007/2010 Emissions Standard with A Simplified Aftertreatment System?


    Additional title:

    Sae Technical Papers


    Contributors:

    Conference:

    SAE 2006 World Congress & Exhibition ; 2006



    Publication date :

    2006-04-03




    Type of media :

    Conference paper


    Type of material :

    Print


    Language :

    English




    Can heavy-duty diesel engines fueled with DME meet US 2007/2010 emissions standard with a simplified aftertreatment system?

    Teng,H. / McCandless,J.C. / AVL Powertrain Engng.,US | Automotive engineering | 2006


    Emissions solutions for 2007 and 2010 heavy-duty diesel engines

    Leet,J.A. / Simescu,S. / Froelund,K. et al. | Automotive engineering | 2004


    Emissions Solutions for 2007 and 2010 Heavy-Duty Diesel Engines

    Roberts, Charles E. / Leet, Jeffrey A. / Froelund, Kent et al. | SAE Technical Papers | 2004


    Emissions Solutions for 2007 and 2010 Heavy-Duty Diesel Engines

    Leet, J. A. / Simescu, S. / Froelund, K. et al. | British Library Conference Proceedings | 2004


    2004-01-0124 Emissions Solutions for 2007 and 2010 Heavy-Duty Diesel Engines

    Leet, J. A. / Simescu, S. / Froelund, K. et al. | British Library Conference Proceedings | 2004