The ISRU Pilot Excavator, or IPEx, is a robotic excavator funded by NASA’s Space Technology Mission Directorate (STMD). The Concept of Operations for IPEx involves the robot driving on the lunar surface up to 70 km at a speed of up to 30 cm/s. As such, it is critical to the mission’s success to optimize the design of the wheels for performance in lunar conditions, specifically in lunar regolith. To achieve this, an array of tests was completed to observe the effects of various wheel design choices on the driving performance of the wheels in lunar regolith simulant. In order to facilitate testing, we designed a 12” dia. configurable wheel to allow for interchangeability between various wheel formations. Two types of wheel parts were designed to be swapped: cleats, which form the tread of the wheel; and grousers, which protrude from the treads. The test variables that we considered were as follows: square vs. round wheel shape, solid vs. perforated cleats, cleat spacing, grouser height, and grouser spacing. By combining different settings of each of these test variables, ten discrete wheel designs were created and tested. The configurable test wheels were mounted on the Regolith Advanced Surface Systems Operations Robot (RASSOR) developed at NASA’s Kennedy Space Center. In our experiments, the robot was driven at a controlled speed across a prepared surface of BP-1 lunar regolith simulant. Four types of tests were conducted: circle driving, straight driving, slope driving, and drawbar pull. The driving tests were chosen to mimic a variety of conditions in which IPEx may be expected to operate, and the drawbar pull test was chosen to provide a standard of comparison with existing wheel design literature. The circle and straight driving tests were each performed at different levels: for the circle driving test, the robot was driven at a constant linear speed and three different angular speeds, while for the straight driving test, the robot was driven at three different linear speeds. The data collected from these tests included the power usage from each of the wheels, measurements of the tread patterns left in the regolith surface, and the amount of slip the wheels experienced, which was calculated using data from an OptiTrack motion capture system. From the results of these experiments, we found that certain test variables were more significant than others in determining performance for each type of test, and no single wheel design clearly outperformed the others in all areas. The details of our findings will be discussed further in this paper. This data will be utilized to inform the design of the wheels for IPEx and can provide a basis for the design of wheels for future lunar terrain vehicles.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    ISRU Pilot Excavator Wheel Testing in Lunar Regolith Simulant


    Contributors:
    Liz Zhang (author) / Jason Schuler (author) / Adam Dokos (author) / Yinan Xu (author) / Evan Bell (author) / Thomas Muller (author)

    Conference:

    ASCE Earth and Space 2024 ; 2024 ; Miami, FL, US


    Type of media :

    Conference paper


    Type of material :

    No indication


    Language :

    English




    Pneumatic Excavator and Regolith Transport System for Lunar ISRU and Construction

    Zacny, Kris / Mungas, Greg / Mungas, Chris et al. | AIAA | 2008


    Pneumatic Excavator and Regolith Transport System for Lunar ISRU and Construction

    Zacny, K. / Mungas, G. / Mungas, C. et al. | British Library Conference Proceedings | 2008


    Lunar Polar Environmental Testing: Regolith Simulant Conditioning

    Kleinhenz, J. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2014


    NASA Lunar Regolith Simulant Update

    J. Gruener | NTIS | 2024


    NASA Lunar Regolith Simulant Program

    Edmunson, J. / Betts, W. / Rickman, D. et al. | NTRS | 2010