Use of a laser to transmit power to a photovoltaic array has been proposed many times, including significant work done at NASA Glenn during the 1990s, but until recently the technology has lagged behind the ambitious requirements. The current NASA objective of lunar polar exploration provides the need, and evolution of higher-power and more efficient lasers provides the opportunity. Exploration of the ice-bearing craters near the lunar poles, where complete absence of sunlight precludes solar power, have been identified as a significant technology challenge for NASA’s future exploration. An approach to solve this is to use a laser to send power from the illuminated crater rim to a photovoltaic receiver on a rover inside the permanently dark region. A conceptual design was done of a prototype laser power system to be included on a proposed flight demonstration of the Kilopower space reactor. For the design, the laser transmitter is mounted on a small rover capable of moving to a location in line of sight of the receiving rover, e.g., on a crater rim with a view into the permanently dark region to be explored. A 250-watt laser diode bar transmits power at 808 nm, using a 10.5 cm optical beam director. The beam is received by a GaAs solar array mounted on the exploring rover, where it is converted into electrical power at ~50% optical to electrical efficiency. For the flight demonstration, 50 meters of laser transmission was required. The design showed a total laser mass of 7.8 kg is capable of producing the beam needed, not including the thermal control system. The demonstration design demonstrates 50-m transmission, but it would be valuable to have longer point-to-point beaming on the moon. Long beam paths require higher coherence than the diode laser bars of the demonstration system. The development of high-efficiency diode-pumped fiber lasers meets this technology need: and diode-pumped fiber lasers using the Er/Yb system can be purchased commercially with overall conversion efficiency of greater than 50% at wavelength 1.06 micrometers. Two technologies for a photovoltaic converter for this wavelength are the InGaAs photovoltaic cell, using technology developed for multi-junction space solar cells, or newly-developed high-quantum efficiency silicon cells. The next step to mature the technology would be a lunar flight demonstration. In the future, this has the potential to enhance and enable future human exploration of the moon, harvesting and utilizing the ice resources of these permanently-shadowed craters.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Lunar Polar Exploration with Beamed Powered Rovers


    Contributors:

    Conference:

    2020 Conference on Advanced Power Systems for Deep Space Exploration ; 2020 ; Virtual, US


    Type of media :

    Miscellaneous


    Type of material :

    No indication


    Language :

    English




    Prospecting Rovers for Lunar Exploration

    Graham, Jerry B. / Vaughn, Jason A. / Farmer, Jeffery T. | NTRS | 2007


    Prospecting Rovers for Lunar Exploration

    Graham, Jerry B. | IEEE | 2007


    Unmanned lunar rovers: Utilization for exploration

    Plescia, J. B. / Lane, A. L. / Miller, D. P. | NTRS | 1993


    Rovers for Mars Polar Exploration

    Stoker, Carol / DeVincenzi, Donald | NTRS | 1998


    Unmanned lunar rovers: utilization for exploration

    Plescia, J. B. / Lane, A. L. / Miller, D. P. et al. | British Library Conference Proceedings | 1993