This project details the design and analysis of a structure to replace the interface of the P-3B nadir port with an optimized interface for science installations. A new nadir port plug has been designed to replace the OEM (Original Equipment Manufacturer) plug (Lockheed PN 910169) currently used in Nadir ports 1 and 2 on the NASA P-3B aircraft. The plug consists of a milled frame that can be outfitted with customizable flat plates to meet a broad range of science needs. The frame slides into place using the existing P-3B rail system using a lever and tie-rod assembly. The seal interface will contact the Fuselage skin of the aircraft and consists of a bulb E-seal that is riveted around the perimeter of the frame. The flat plate (20 inches x 31 inches) provides a large profile that can be outfitted based on science mission goals and requirements to attach multiple instruments. This is a significant increase to the aircraft capability. Previously, the OEM plug had to be modified to hold very small plates, windows, or instruments limiting the use of the ports.There were several challenges for this project that included a constrained schedule, lack of historical references, and reverse engineering. The unusually tight schedule for design, manufacture, and install limited potential approaches. In addition, design of a new interface to replace the existing plug, on an aircraft designed in the 1960's by Lockheed for the Navy with little to no documentation, required substantial reverse engineering. In order to accomplish this, a suitable method to determine interface requirements with the aircraft had to be solved. After several iterations, the solution was to implement laser scanning techniques to scan the aircraft and the OEM plug and generate a 3D model to capture the design envelope. The structure is designed to maintain a positive margin of safety when subjected to the inertial, pressure, and aerodynamic load requirements for an external installation on the P-3B, as described in the Wallops' P-3B Design Requirements 548-RQMT-0001 Rev. A . A finite element model is created in FEMAP (Finite Element Modeling And Postprocessing) and is run through NX Nastran solver to analyze the structure. After several iterations of analysis, the structure was enveloped to hold 115 pounds evenly distributed on the plate.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Design of P-3 Nadir Port


    Contributors:

    Conference:

    NASA Early Career Forum: Structures, Loads, and Mechanical Systems (SLaMS 2019) ; 2019 ; Palmdale, CA, United States


    Publication date :

    2019-09-01


    Type of media :

    Miscellaneous


    Type of material :

    No indication


    Language :

    English





    SPACECRAFT WITH ANTI NADIR BATTERY RADIATOR

    ASTON RICHARD W / LANGMACK MICHAEL J / TOMZYNSKA ANNA M | European Patent Office | 2019

    Free access

    Optimally solving nadir observation scheduling programs

    Knight, Russell / Smith, Ben | NTRS | 2005


    Spacecraft with anti nadir battery radiator

    ASTON RICHARD W / LANGMACK MICHAEL J / TOMZYNSKA ANNA M | European Patent Office | 2019

    Free access

    Spacecraft with anti nadir battery radiator

    RICHARD W ASTON / MICHAEL J LANGMACK / ANNA M TOMZYNSKA | European Patent Office | 2017

    Free access