CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload, providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cu cm and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high (Delta)v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. 3, 4 Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high ρIsp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature (< 100 C) to yield I2 vapor at or below 50 torr. At low power, the measured performance of an iodine-fed HET is very similar to that of a state-of-the-art xenon-fed thruster. Just as importantly, the current-voltage discharge characteristics of low power iodine-fed and xenon-fed thrusters are remarkably similar, potentially reducing development and qualifications costs by making it possible to use an already-qualified xenon-HET PPU in an iodine-fed system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp −6) torr at −75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. In the present paper, we describe the design and testing of the engineering model propellant feed system for iSAT (see Fig. 1). The feed system is based around an iodine propellant reservoir and two proportional control valves (PFCVs) that meter the iodine flow to the cathode and anode. The flow is split upstream of the PFCVs to both components can be fed from a common reservoir. Testing of the reservoir is reported to demonstrate that the design is capable of delivering the required propellant flow rates to operate the thruster. The tubing and reservoir are fabricated from hastelloy to resist corrosion by the heated gaseous iodine propellant. The reservoir, tubing, and PFCVs are heated to ensure the sublimed propellant will not re-deposit within the feed system. Heating is accomplished through a number of individual zones to control the overall power expended on heating the system and insulation is employed to minimize the amount of power used to heat the system prior to thruster operation.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Engineering Model Propellant Feed System Development for an Iodine Hall Thruster Demonstration Mission


    Contributors:

    Conference:

    AIAA Propulsion and Energy 2016 Conference ; 2016 ; Salt Lake City, UT, United States


    Publication date :

    2016-07-25


    Type of media :

    Conference paper


    Type of material :

    No indication


    Language :

    English




    Engineering Model Propellant Feed System Development for an Iodine Hall Thruster Demonstration Mission

    Polzin, Kurt A. / Peeples, Steven R. / Martinez, Armando et al. | AIAA | 2016


    Iodine Satellite (iSAT) Hall Thruster Demonstration Mission Concept and Development

    J. W. Dankanich / K. A. Polzin / D. Calvert et al. | NTIS | 2014


    The Iodine Satellite (iSAT) Hall Thruster Demonstration Mission Concept and Development

    Dankanich, John W. / Polzin, Kurt A. / Calvert, Derek et al. | NTRS | 2014


    Iodine Hall Thruster Feed System Design, Development and Testing

    Dankanich, John / Polzin, Kurt A. | AIAA | 2015


    Overview of Iodine Propellant Hall Thruster Development Activities at NASA Glenn Research Center

    Kamhawi, Hani / Haag, Thomas / Benavides, Gabriel et al. | NTRS | 2016