A novel concept of small size (diameter less than 15 inches) entry probes named SPRITE (Small Probe Re-entry Investigation for TPS Engineering) has been developed at NASA Ames Research Center (ARC). These flight probes have on-board data acquisition systems that have also been developed in parallel at NASA ARC by Greg Swanson1. Flight probes of this size facilitate testing over a wide range of conditions in arc jets available at NASA ARC, thereby fulfilling a 'test what you fly' paradigm. As indicated by the acronym, these probes, with suitably tailored trajectories, are primarily meant to be robotic flight test beds for TPS materials, although the design is flexible enough to accommodate additional objectives of flight-testing other vehicle subsystems. A first step towards establishing the feasibility of the SPRITE concept is to arc-jet test fully instrumented models at flight scale. In a follow-on to the Large-Scale Article Tests (LSAT2) performed in the 60 MW Interaction Heating Facility (IHF) in late 2008/early 2009, a full-scale model of Deep Space-2 (DS23) made of red oak was tested in the 20 MW Aerodynamic Heating Facility (AHF). There were no issues with mass capture by the diffuser for blunt bodies of roughly 15 inches diameter tested in the 18-inch nozzle of the AHF. Building on this initial success, two identical test articles - SPRITE-T1-1 and SPRITE-T1-2 (T1 indicating the choice of back shell geometry) - were fabricated, and one of them, SPRITE-T1-1, was tested in the AHF recently. Both these test articles, 14 inches in diameter, have a 45deg sphere-cone (like DS2) made of PICA bonded on to a 1/8th inch thick aluminum shell using RTV. The aft portion of the test article is a conical frustum (15deg cone angle) with LI-2200 bonded on to the aluminum shell. Each model is fully instrumented with: (a) thermocouples imbedded in plugs in the heat shield, (b) thermocouples bonded to the aluminum substructure; the thermocouples are distributed over the entire shell, and (c) a few strain gages. Data from some of the thermocouples and gages are acquired by the on-board data acquisition system (DAS), while data from the others are routed to the facility-provided DAS, thereby enabling a cross check on the in situ measurement capability. as inputs to v2.6.1 of the in-house materials thermal response code, FIAT


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Flowfield Analysis of a Small Entry Probe (SPRITE) Tested in an Arc Jet


    Contributors:

    Conference:

    AIAA Aerospace Sciences Meeting ; 2012 ; Nashville, TN, United States


    Publication date :

    2012-01-09


    Type of media :

    Conference paper


    Type of material :

    No indication


    Language :

    English





    Flowfield Analysis of a Small Entry Probe (SPRITE) Tested in an Arc Jet

    Prabhu, D. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2012


    Simulation of HyMETS Flowfield around Baby-SPRITE Entry Probe

    Ventura Diaz, Patricia / Yoon, Seokkwan / Panerai, Francesco et al. | AIAA | 2019


    Simulation of HyMETS Flowfield Around Baby-SPRITE Entry Probe

    Ventura Diaz, Patricia / Yoon, Seokkwan / Panerai, Francesco et al. | NTRS | 2019


    AIAA-2019-3262: Simulation of HyMETS Flowfield Around Baby-SPRITE Entry Probe

    Diaz, Patricia Ventura / Yoon, Seokkwan / Panerai, Francesco et al. | British Library Conference Proceedings | 2019