A tool makes a cut perpendicular to the cylindrical axis of a core hole at a predetermined depth to free the core at that depth. The tool does not damage the surrounding material from which the core was cut, and it operates within the core-hole kerf. Coring usually begins with use of a hole saw or a hollow cylindrical abrasive cutting tool to make an annular hole that leaves the core (sometimes called the plug ) in place. In this approach to coring as practiced heretofore, the core is removed forcibly in a manner chosen to shear the core, preferably at or near the greatest depth of the core hole. Unfortunately, such forcible removal often damages both the core and the surrounding material (see Figure 1). In an alternative prior approach, especially applicable to toxic or fragile material, a core is formed and freed by means of milling operations that generate much material waste. In contrast, the present tool eliminates the damage associated with the hole-saw approach and reduces the extent of milling operations (and, hence, reduces the waste) associated with the milling approach. The present tool (see Figure 2) includes an inner sleeve and an outer sleeve and resembles the hollow cylindrical tool used to cut the core hole. The sleeves are thin enough that this tool fits within the kerf of the core hole. The inner sleeve is attached to a shaft that, in turn, can be attached to a drill motor or handle for turning the tool. This tool also includes a cutting wire attached to the distal ends of both sleeves. The cutting wire is long enough that with sufficient relative rotation of the inner and outer sleeves, the wire can cut all the way to the center of the core. The tool is inserted in the kerf until its distal end is seated at the full depth. The inner sleeve is then turned. During turning, frictional drag on the outer core pulls the cutting wire into contact with the core. The cutting force of the wire against the core increases with the tension in the wire and, hence, with the frictional drag acting on the outer sleeve. As the wire cuts toward the center of the core, the inner sleeve rotates farther with respect to the outer sleeve. Once the wire has cut to the center of the core, the tool and the core can be removed from the hole. The proper choice of cutting wire depends on the properties of the core material. For a sufficiently soft core material, a nonmetallic monofilament can be used. For a rubber-like core material, a metal wire can be used. For a harder core material, it is necessary to use an abrasive wire, and the efficiency of the tool can be increased greatly by vacuuming away the particles generated during cutting. For a core material that can readily be melted or otherwise cut by use of heat, it could be preferable to use an electrically heated cutting wire. In such a case, electric current can be supplied to the cutting wire, from an electrically isolated source, via rotating contact rings mounted on the sleeves.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Core-Cutoff Tool


    Contributors:


    Publication date :

    2007-03-01


    Type of media :

    Miscellaneous


    Type of material :

    No indication


    Language :

    English





    CUTOFF TOOL AND CUTOFF STRUCTURE WITH CUTOFF TOOL

    YAMATAKE TAKAFUMI / KOBAMATSU KAZUNORI | European Patent Office | 2018

    Free access

    CUTOFF TOOL FOR WIRE HARNESS AND CUTOFF STRUCTURE WITH THE CUTOFF TOOL

    NISHIMOTO KAZUYA / TOKUNAGA HIROAKI / KOBAMATSU KAZUNORI | European Patent Office | 2016

    Free access


    WATER CUTOFF TOOL FOR WIRING HARNESS AND WATER CUTOFF STRUCTURE OF WIRING HARNESS

    OKAMOTO AKITOSHI | European Patent Office | 2016

    Free access