Unsteady thrust augmentation was measured on a large scale driver/ejector system. A 72 in. long, 6.5 in. diameter, 100 lb(sub f) pulsejet was tested with a series of straight, cylindrical ejectors of varying length, and diameter. A tapered ejector configuration of varying length was also tested. The objectives of the testing were to determine the dimensions of the ejectors which maximize thrust augmentation, and to compare the dimensions and augmentation levels so obtained with those of other, similarly maximized, but smaller scale systems on which much of the recent unsteady ejector thrust augmentation studies have been performed. An augmentation level of 1.71 was achieved with the cylindrical ejector configuration and 1.81 with the tapered ejector configuration. These levels are consistent with, but slightly lower than the highest levels achieved with the smaller systems. The ejector diameter yielding maximum augmentation was 2.46 times the diameter of the pulsejet. This ratio closely matches those of the small scale experiments. For the straight ejector, the length yielding maximum augmentation was 10 times the diameter of the pulsejet. This was also nearly the same as the small scale experiments. Testing procedures are described, as are the parametric variations in ejector geometry. Results are discussed in terms of their implications for general scaling of pulsed thrust ejector systems
Performance Assessment of a Large Scale Pulsejet- Driven Ejector System
44th Aerospace Sciences Meeting and Exhibit ; 2006 ; Reno, NV, United States
2006-05-01
Conference paper
No indication
English
AIAA 2006-1021 Performance Assessment of a Large Scale Pulsejet-Driven Ejector System
British Library Conference Proceedings | 2006
|Numerical Study of a Pulsejet-Driven Ejector
AIAA | 2009
|Unsteady Ejector Performance: An Experimental Investigation Using a Pulsejet Driver
British Library Conference Proceedings | 2002
|